hilux 2008 mileage info please

[gttuning]

hi all.any issue with these ,,i read 93c66 after mod.ODO is 0 and flash all the time..
i load back ori dump still same,
any problem with these?
i need 171000km org236173
thanks

[nikz]

here is your file

[ivanbarba]

Hi Friend

171K Tested

[nikz]

Hi Friend

171K Tested

this no good.........................

[ivanbarba]

i check your file and my file and both are good, the algo is with swap bytes, with your file i calculate 171003 with mi file i calculate 170986

[gttuning]

here is your fileSame problem...trip will move mileage shows 0 and blinks

Sent from my SM-G935F using Tapatalk

[Triniguy]

clean the eep and try again

[Cllau]

hi all.any issue with these ,,i read 93c66 after mod.ODO is 0 and flash all the time..
i load back ori dump still same,
any problem with these?
i need 171000km org236173
thanks

Hilux 2008 93C66 171003Km... Remove c66 from pcb and use my dump. Your dump has data corrupted

[gttuning]

Hilux 2008 93C66 171003Km... Remove c66 from pcb and use my dump. Your dump has data corruptedI try now.
Thanks.

Sent from my SM-G935F using Tapatalk

[gttuning]

Got it sorted i found one line broken in the circuit board under the eep.
Thanks all for your effort.

Sent from my SM-G935F using Tapatalk

[gttuning]

Same problem...trip will move mileage shows 0 and blinks

Sent from my SM-G935F using TapatalkI tested your file and its ok....just leting you know.

Sent from my SM-G935F using Tapatalk

[gttuning]

here is your fileHi i tested your file after and its working ok...just to let you know.

Sent from my SM-G935F using Tapatalk

[gttuning]

Hilux 2008 93C66 171003Km... Remove c66 from pcb and use my dump. Your dump has data corruptedHi your file shows 137000 and blinks.


Sent from my SM-G935F using Tapatalk

[nikz]

I realized that the original dump is bad
and you need a new one