Fiat Doblo IAW 5NF.T2 C146 immo OFF PLEASE HELP

[stefaudio]

Hi All Frends

Please help me to immo off fiat doblo with iaw5nf.t2 c146 with can

i try 5 solutions but withhout sucses

memori is 95160

i cut permanent power from ecu and conect to ACC but steel no luck

with every file wen i disconect immo ring and try to start car not starting wen i conect immo ring and key icon go off car start and run perfect but content of the file is steel the same no difrenses.Very strange.I try 5 diferent files and all same.May be immo is not in eeprom 95160

I tri wit ffffs and i post some off files

PLEASE HELP

[rafal]

If you decide to turn off the immobilizer must cut off from the plug driver
pin 20 and 51 (CAN-L and CAN-H)
dON'T BE WORK ALL FUNCTIONS CONTROLLED BY THE LINE CAN!
If you prepare electronic switch for delay signal CAN to 3 sec all will be work ok

[stefaudio]

Ok thanks Rafal i see me mistake

Car start and run ok wit ECUvonix immo off file and CAN off but now temperature gadge and rev gadge not work

Please hou to do these.....If you prepare electronic switch for delay signal CAN to 3 sec all will be work ok

[rafal]

e.g. https://www.aliexpress.com/store/product/Best-Price-1-pcs-Delay-Turn-Off-Relay-Module-Time-Delay-Switch-12V-For-Robot/1089303_1677057391.html

[stefaudio]

I see thanks.But evan with that 5nft2 will no work,only way is with cutet CAN lines.I try all.