PDA

View Full Version : Dashboard renault clio DDT2000



rabizone
25th October, 2009, 10:10 PM
Hi everybody,

I already have DDT2000 and k+can interface, but I can only see the ecu injection, airbag... What I would like to make is to change odometer value. I can do that only for a few vehicles like megane, espase... But not for my car (clio). I think is because my Database is very limited.

Anyone know how can I get complete files for clio ?

Thank a lot.

Ps: For the other vehicles the dashboard xml files begins by tdb_xxxx

matekhr
26th October, 2009, 01:54 PM
What k+can interface do you have?
Does it work in can mode?

You can change Clios dashboard settings (depending on production year of your car) under UCH settings, you will see something like "Configuration de TdB". I used this to activate cruise control display on my Clio.
Mail me on --------- for more info and some screenshots.
But, AFAIK, it's not possible to change odometer value using DDT2000. :(

rabizone
26th October, 2009, 03:15 PM
What k+can interface do you have?
Does it work in can mode?

You can change Clios dashboard settings (depending on production year of your car) under UCH settings, you will see something like "Configuration de TdB". I used this to activate cruise control display on my Clio.
Mail me on ----------- for more info and some screenshots.
But, AFAIK, it's not possible to change odometer value using DDT2000. :(

I have a VAGCOM interface bought on ebay...
How can I test it to know if it works in can mode ?

Anyone know with which software and how we can change odometer value?

matekhr
26th October, 2009, 06:39 PM
I have a VAGCOM interface bought on ebay...
How can I test it to know if it works in can mode ?

Anyone know with which software and how we can change odometer value?

This interface will not work in can mode.

Use Licznik.

rabizone
26th October, 2009, 09:27 PM
Where can I buy Liczink interface ?
It is possible to use other interfaces like K + CAN or elm327 with Liczink or similar software ?

gadget78
28th October, 2009, 10:40 PM
As far as im aware (working in renault main dealer, and daily use on clip )
no interface will change/correct milage (some allow for one time correction but thats only if its got blank body computer)

best way for you would be to remove dash locate the eprom and reprogram that way .... ?

EDIT
checked today, depends on what clio you have !
Clio iii does allow mileage correction via software (clip) and DLC

RCS
11th November, 2009, 08:24 PM
Would this interface work with DDT2000...
USB OBD2 OBDII Vag Com KKL Interface Cable for Audi VW:eBay Motors (item 140302955212 end time Nov-17-09 19:21:22 PST) (http://cgi.ebay.com/ebaymotors/USB-OBD2-OBDII-Vag-Com-KKL-Interface-Cable-for-Audi-VW_W0QQcmdZViewItemQQ_trkparmsZalgoQ3dLVIQ26ituQ3d UCIQ26otnQ3d2Q26psQ3d6QQ_trksidZp3911Q2em7QQcatego ryZ43989QQihZ004QQitemZ140302955212)

Thanks...

matekhr
12th November, 2009, 10:10 PM
Would this interface work with DDT2000...
USB OBD2 OBDII Vag Com KKL Interface Cable for Audi VW:eBay Motors (item 140302955212 end time Nov-17-09 19:21:22 PST) (http://cgi.ebay.com/ebaymotors/USB-OBD2-OBDII-Vag-Com-KKL-Interface-Cable-for-Audi-VW_W0QQcmdZViewItemQQ_trkparmsZalgoQ3dLVIQ26ituQ3d UCIQ26otnQ3d2Q26psQ3d6QQ_trksidZp3911Q2em7QQcatego ryZ43989QQihZ004QQitemZ140302955212)

Thanks...

Yes. :)
But not for can-based vehicles. :(

amer78
6th January, 2011, 12:52 PM
hello people i have THE DDT2000 +KKL cable
i want to activate the Cruise control on my clio2(2003)
engine K4j (automatic transmission)
please help me and tell me the procedures???

Cristi_Xp
24th January, 2011, 02:57 PM
this is what you need for cruise control .
Cruise control on a RS 172 or a dCi (DIY) (http://www.cliosport.net/forum/showthread.php?521679-Cruise-control-on-a-RS-172-or-a-dCi-%28DIY%29)