Golf 6 -2009 - NEed ECU pin code - Marelli 1.4 [Sitemap]

View Full Version : Golf 6 -2009 - NEed ECU pin code - Marelli 1.4

bursuc

21st November, 2017, 01:00 AM

Hi all DK friends,

Have one golf 6 with this magnetti marelli ecu
VW Golf-6 2009
ECU: Magneti Marelli 1.4 16v
03C906024BD
4HV Benzin CGGA

Eeprom ST95320

Need pincode and if possible a procedure to align the ecu with immo.

Best regards

CarCity

21st November, 2017, 04:57 AM

bursuc

21st November, 2017, 05:21 PM

Anybody can help wit procedure to pair it with immo ? regards

lupu_sandu

21st November, 2017, 05:22 PM

OBD only, with AVDI.

haroutioun

21st November, 2017, 06:32 PM

Anybody can help wit procedure to pair it with immo ? regards
Hello.
did you read immo data from dash?, if yes, so load it here to try manual do it for you.
Ps if your original ecu damage and if you are trying to adapt new used one so new used one must be the same part number as original ecu , to be the power class same as original ecu to done the manual procedure.

bursuc

21st November, 2017, 06:34 PM

Hello.
did you read immo data from dash?, if yes, so load it here to try manual do it for you.

I will do it tomorrow as car is a bit far away. Hope VVDI2 can read it by OBD . Is obd file enough ?

regards

haroutioun

21st November, 2017, 06:56 PM

I will do it tomorrow as car is a bit far away. Hope VVDI2 can read it by OBD . Is obd file enough ?

regards
Hello.
yes you can read immo by vvdi2 via obd and load it here, you can try by vvdi2 also to adapt your ecu by using (Adapt unite module) function.

rob h

21st November, 2017, 07:00 PM

cluster, eeprom, and flash!