Synchronization CEM-ECU Volvo S60

[Josue]

Hi guys, I have a Volvo S60 that does not start.
I have read the ECU (95320) and the CEM module (93C86) to synchronize them.
I know that Tango can synchronize them but I do not have it.
Can anybody help me?
Thank you.

[car_soft_gorj]

read abs id and post for synk !

[Josue]

How do I read the ABS ID?

[Mr_Fix]

Synchronization in your dumps normal.
Possibly the reason at you in something another.

[car_soft_gorj]

How do I read the ABS ID?

read with delphi launch ......

[Josue]

I have a photo of the ABS label, is that okay?
It is that the car does not have it here and the CEM is disassembled and the diagnostic machine does not connect with the ABS

[immokill]

I had same problen all sync was good . Ignition lock was my problem.

[Josue]

In this car the problem is that the diagnostic machine said that the key was not coded. So I think the whole problem can be in the synchronism of the two units.

[Josue]

PD: I have two keys and none start

[Josue]

Hello again guys, I have put the CEM module in the car and I have seen the ABS ID, I attached the photos with Delphi so that you can synchronize the ECU with the CEM.
Thanks again.

[Josue]

Anybody help?