PDA

View Full Version : Advice no fap alfa 159...



giary74
29th November, 2017, 07:11 PM
Hello guys,
I deleted the FAP from this 159 by using bit switch off procedure, but maybe I did something wrong because the car smokes a lot and does not work well.
Although the FAP has been materially eliminated, it seems that it continues to regenerate.
Before writing the map, did not reset or change the new fap ... could the problem depend on this?
Can anybody give me a hand? thank you.
I attached file ori and switch off

maajkii
29th November, 2017, 07:17 PM
Hello guys,
I deleted the FAP from this 159 by using bit switch off procedure, but maybe I did something wrong because the car smokes a lot and does not work well.
Although the FAP has been materially eliminated, it seems that it continues to regenerate.
Before writing the map, did not reset or change the new fap ... could the problem depend on this?
Can anybody give me a hand? thank you.
I attached file ori and switch off

Check live data and soot


Wysłane z iPhone za pomocą Tapatalk

kiriki6969
29th November, 2017, 07:59 PM
Test and report:wink:

giary74
9th January, 2018, 09:01 PM
hi guys, I have not tryed this map because the 159 has eaten the flap swirl.
Now it's with the head open, so I wanted to disable the swirl too.
Could someone delete swirl from the map? thank you

voltechcar
9th January, 2018, 09:48 PM
dpf off switch not work, Swiftec and asc not work, better they cut 50% table dtc.....

olds 454
10th January, 2018, 12:48 AM
Solution one

olds 454
10th January, 2018, 12:57 AM
one of them will work 100%

giary74
11th January, 2018, 07:44 AM
Hi, this is ori file.
I need FAP OFF and SWIRL OFF.
Tx a lot

Ignasvw
11th January, 2018, 08:53 AM
From dpf -DISCONNECT DIFF.PRESSURE SENSOR / 2TEMP SENSORS
From swirl -DISCONNECT SWIRL PLUG
if i helped you push thanks and reputation buttons.

olds 454
11th January, 2018, 10:48 PM
:peaceful:
Here are your files