Opel Vectra C 3-line CID dump

[bank]

Hi guys!

Pls help to find dump for Opel Vectra C 3-line CID (not DB, which is 2-line CID)

[bank]

I've already found dump for BH, but it has another size, more then 2-line dump.

Does anybody know how to update firmware in CID "DB" to make it with 3 lines?

[bogege]

My information about this is that it is not possible for Vectra C to be made from eeprom!
It is possible for Astra H and Zafira B to be updated from 2 lines to 3 lines from eeprom!

[bank]

I have another itformation that it's possible.
I can find proof link where one guy can do it for some money.
May be not from eeprom, but ... I'm trying to find a solution

[bank]

Here is info - link (https://www.vectra-c.com/forum/showthread.php?213425-Woody-s-Vx-Opel-ICE-Home-of-the-Comfort-Unit-and-Accessories-from-www-PepaS-cz)
Vectra-C / Signum CID firmware update: firmware version CE55/CE59
(2-lines BC) -> CE83 (3-lines BC and OPC/VXR startup logo)

[Vikingopel]

[QUOTE = bank; 3159946] Aquí está la información - enlace (https://www.vectra-c.com/forum/showthread.php?213425-Woody-s-Vx-Opel-ICE-Home-of-the-Comfort-Unit-and-Accessories-from-www-PepaS-cz)
Vectra-C / Signum CID actualización de firmware: versión de firmware CE55 / CE59
(2 líneas BC) -> CE83 (3 líneas BC y OPC / VXR logo de inicio) [/ QUOTE ]

The file goes in that memory.
You must have a programmer and a suitable baseboard.
There's also a friend who does it for Cambus.

[bank]

Could it be done without chip disordering? Wia SPS

[Phatworx]

On the Zaf/Astra H CID.
There is a hybrid eeprom file which you load on to the CID, then SPS the display and then put the original eeprom back
on, then the 3 line is upgraded.


Gav

[bank]

On the Zaf/Astra H CID.

I know how to do it for Astra|Zafira CID.
I want to find simmilar trick for Vectra.
Also it's intresting how to convert 2-line GID to 3-line the same way. It is also possible

[plasma533]

there is no trick, you need to flash the spansion chip with the 3 line software as well as changing the eprom

[bank]

there is no trick, you need to flash the spansion chip with the 3 line software as well as changing the eprom
I thought, there was a solution without chip disoldering. :(
I'll try to find video (I saw it earlier) where display (not for Astra) was updated wia sps

[plasma533]

as said before the ONLY way for vectra is reflashing the spansion chip.. but please do find the video..

[Donwoody]

[QUOTE = bank; 3159946] Aquí está la información - enlace (https://www.vectra-c.com/forum/showthread.php?213425-Woody-s-Vx-Opel-ICE-Home-of-the-Comfort-Unit-and-Accessories-from-www-PepaS-cz)
Vectra-C / Signum CID actualización de firmware: versión de firmware CE55 / CE59
(2 líneas BC) -> CE83 (3 líneas BC y OPC / VXR logo de inicio) [/ QUOTE ]

The file goes in that memory.
You must have a programmer and a suitable baseboard.
There's also a friend who does it for Cambus.
Whats the file that needs flashing to this chip i have the updated eeprom chip already just need to file to flash to the chip

[tryplex92]

Whats the file that needs flashing to this chip i have the updated eeprom chip already just need to file to flash to the chip
hi mate can you give me update file for eeprom . Thanks

[bank]

https://mega.nz/#!5H4wwKxA!VF5UZ2awS_JKHmapf83MqhP-7ZhxwTEzzksE02Wwac8 - Vectra C Delphi 3-line CID

[marian4096]

https://mega.nz/#!5H4wwKxA!VF5UZ2awS_JKHmapf83MqhP-7ZhxwTEzzksE02Wwac8 - Vectra C Delphi 3-line CID

hello guys, i'm very much trying to update from ce55 to ce83 firmware. when i read the bin file from eprom on ce55 filesize is arround 500 kb. I extracted this file you provide and is 1024kb file dimension.
it is almost double size comparing to original bin file from ce55. Would i flash it on the same eeprom chip? will it work? or do I need another type of eeprom?
thanks.:peaceful:

[bank]

Because you use dump from Delphi for Siemens.
They are different

[policevidin]

Can sombody upload the file for 3-line display for siemens? Thanks
Or send me on e-mail: xxxxxxxxxxxxxxxx

[mpmichu]

Can anyone help with CID software for 3-lines SiemnesVDO (only flash or eprom + flash ) ???

[somi16v]

[QUOTE = bank; 3185191] Tudom, hogyan kell csinálni az Astra | Zafira CID esetén.
Szeretnék hasonló trükköt találni a Vectra számára.
Érdekes az is, hogyan lehet átalakítani a 2 soros GID-et 3-vonalossá. Lehetőség van [/ QUOTE]

Hi!

Interested in exactly what to rewrite to make the H astra cid 2 line display 3 line!
KS alpha code to BN alpha code! Flash and eeprom rewrite?
Thanks!

[shooting]

[QUOTE = bank; 3185191] Tudom, hogyan kell csinálni az Astra | Zafira CID esetén.
Szeretnék hasonló trükköt találni a Vectra számára.
Érdekes az is, hogyan lehet átalakítani a 2 soros GID-et 3-vonalossá. Lehetőség van [/ QUOTE]

Hi!

Interested in exactly what to rewrite to make the H astra cid 2 line display 3 line!
KS alpha code to BN alpha code! Flash and eeprom rewrite?
Thanks!

Post your display dump for help

wbr

[somi16v]

The contents of the eeprom?

[shooting]

the contents of the eeprom?

Obviously............

wbr

[somi16v]

original KS CID dump

[somi16v]

[QUOTE = lövés; 3779202] Nyilvánvalóan ............

wbr [/ QUOTE]
Original KS CID dump

[shooting]

original KS CID dump

Use this dump, you will need to re-register it using OPCOM and pair radio using 8924

wbr

[bank]

[QUOTE = bank; 3185191] Tudom, hogyan kell csinálni az Astra | Zafira CID esetén.
Szeretnék hasonló trükköt találni a Vectra számára.
Érdekes az is, hogyan lehet átalakítani a 2 soros GID-et 3-vonalossá. Lehetőség van [/ QUOTE]

Hi!

Interested in exactly what to rewrite to make the H astra cid 2 line display 3 line!
KS alpha code to BN alpha code!

All you need is to replace 13111246 and KS by 13275954 and BN twice.
So write in 0x18d-0x197 ca 93 32 00 ca 93 32 42 4e 42 4e
Then make SPS using Tech2 or GM MDI + GlobalTIS

[somi16v]

All you need is to replace 13111246 and KS by 13275954 and BN twice.
So write in 0x18d-0x197 ca 93 32 00 ca 93 32 42 4e 42 4e
Then make SPS using Tech2 or GM MDI + GlobalTIS

hi!
Thanks!
sps not unfortunately!
Copying AM29F160DB flash content is not good from a 3 line version?
sps no unfortunately!Copying AM29F160DB flash content is not good from a 3 line version?

[somi16v]

Use this dump, you will need to re-register it using OPCOM and pair radio using 8924

wbr
Thanks!
The display started, but 2 lines left...

[bank]

hi!
Thanks!
sps not unfortunately!
Copying AM29F160DB flash content is not good from a 3 line version?
Try and report. I do it only using sps

[somi16v]

Try and report. I do it only using sps

does not start...

[bank]

So, you need sps

[Kamilgsi]

So, you need sps
What Tis do you use? I have Globaltis V40 and I can't do SPS

[bank]

Use GlobalTis V32

[Kamilgsi]

do you think here is my problem that i will try v40?

[bank]

v40 can't do SPS, only v32 or earlier

[plasma533]

You cant use SPS to flash Vectra C 3 line display. Must use modified eprom and also change contents of AMD spansion chip

[Kamilgsi]

You cant use SPS to flash Vectra C 3 line display. Must use modified eprom and also change contents of AMD spansion chip
I mean Astra H
I mean

[dadi3337]

Hello. has anyone modified eprom vc 3 line siemens and processor batch?
***************
thenks

[bank]

You cant use SPS to flash Vectra C 3 line display. Must use modified eprom and also change contents of AMD spansion chip

Unfortunately, there is no available solution to modify Siemens for Vectra just using SPS and globalTIS cause there is no updede for Delphi OVC (3line CID) from GM...

[somi16v]

[QUOTE = bank; 3801158] Sajnos nincs elérhető megoldás a Siemens for Vectra módosítására, csak SPS és globalTIS használatával, mivel nincs frissítés a Delphi OVC (3line CID) számára a GM-től. [/ QUOTE]
Hi!
The H Astra display has already solved the 3-line version!
Now on the C Vectra display I Want someone has eeprom content for it? Do i need an SPS update in the same way afterwards?
Thanks!
H The Astra display has already solved the 3-line version!Now on the C Vectra display I want someone has eeprom content for it? Do I need an SPS update in the same way afterwards?

[andrzej8711]

I have two files. One probably logged out

[tryplex92]

Hi guys any recommendation to read AM29F160DB?Thanks in advance

[plasma533]

i used Minipro with a TSOP48 adapter

[carradio2001]

I can update Vectra-C CID to 3 lines. Also genuine firmware (CE83) or OPC Insignia firmware(modified CE83). But only if the display come to me.

Carradio2001.

[smok1967]

I have a display from vectra c 24461297 bin from Siemens VDO 13111166 works fine but from BN 13275954 not either the bin is defective, so if it's good I have all 93c66 bins.

[shooting]

Witam
Mam plik bin do BN 13275954 kodem ale po wgraniu wyświetlają się trzy linie zamazane w różnych rogu.

Use ENGLISH ONLY here....

wbr

[rafal]

Use ENGLISH ONLY here....

wbr

yeah............how many times can we write about.............. sad
some people doesn't care about rules - anyway:
Join Date Jun 2016
Posts 3
Thanked 0 Times in 0 Posts

[smok1967]

I have a display from vectra c 24461297 bin from Siemens VDO 13111166 works fine but from BN 13275954 not either the bin is defective, so if it's good I have all 93c66 bins.

[Decode Ghost]

Hi
displey pin is.....9166

[KayLastOS]

https://mega.nz/#!5H4wwKxA!VF5UZ2awS_JKHmapf83MqhP-7ZhxwTEzzksE02Wwac8 - Vectra C Delphi 3-line CID
could you reupload please? thanks

Also searching for a Corsa D CID, flash and/or eeprom, if anyone have it.