PDA

View Full Version : vw golf airbag need help



weltune
27th October, 2009, 03:55 PM
i have a 2009 VW golf accident with 2 activated pretensioners, the airbags did not activate, the airbag system cannot be access by original diagnostic machine 5052 after the accident ,airbag module no. 5K0 959 655, ic no. 95640, can someone help me please, thanks in advance


does anyone have a good data for me to compare , thks

weltune
6th May, 2010, 03:07 PM
does anyone have a good dump for me to compare? thks

teleser
6th May, 2010, 09:08 PM
clear file try post..
pass in:pm

weltune
11th May, 2010, 09:26 AM
hello
still cannot get the vas 5052 connect to airbag system, check alll wiring & fuse is ok, anyone advise on what i should check next? thanks in advance

teleser
11th May, 2010, 05:12 PM
hello
still cannot get the vas 5052 connect to airbag system, check alll wiring & fuse is ok, anyone advise on what i should check next? thanks in advance
2.7 ohm rezistans cable connect your testing..

exxl
11th May, 2010, 06:38 PM
check also the bosch ic in the airbag controller maybe is he damaged

carclima
11th May, 2010, 06:57 PM
i have a 2009 VW golf accident with 2 activated pretensioners, the airbags did not activate, the airbag system cannot be access by original diagnostic machine 5052 after the accident ,airbag module no. 5K0 959 655, ic no. 95640, can someone help me please, thanks in advance


does anyone have a good data for me to compare , thks

there is no need for another dump if you CANT establish comunication with modul..check wiring..power suply to this modul..download datasheat for 95640 look for power suply pins on this IC..if this is OK youre modul is DEAD..take another one..TAKE CARE when measure power suply line on this IC..modul should be on flat surface with NO vibration or moving..last what you need is blowed bags..

IF this is my customer car I will search for another modul at least to check all lines are OK

exxl
11th May, 2010, 09:17 PM
like carclima says check this too...and the check too the bosch ic it should beginn with numbers 30xxx, see if this bosch ic driver is there and post here the exact number.

in the new airbag controllers after a crash this ic goes dead so that you think the controller is dead...

thats the new method so that you have to buy a new one controller ;)

teleser
12th May, 2010, 05:30 PM
car test device may be required in these jobs.:rock:

weltune
13th May, 2010, 12:36 AM
car test device may be required in these jobs.:rock:
I am using the Vas 5052 version 16 to diagnose this car, other system are OK, but cannot access the SRS system,

teleser
13th May, 2010, 04:15 PM
I am using the Vas 5052 version 16 to diagnose this car, other system are OK, but cannot access the SRS system,
test equipment do you use.? SRS system does not recognize the car, some test equipment.