PDA

View Full Version : Opel_astra G egr off 1.6XEL multec



Ignasvw
7th December, 2017, 08:48 AM
Hi, maybe someone remembers how to work on this old crap. I have Opel astra g 1.6XEL engine. ECU : Opel multec. I have problem with egr, it says P1405 - Linear exaust gas recirculation ( egr) position. They put brand new egr valve, if they plug connector to it car starts very hard and egr stays open. I think it has faulty ecu, since this ecu is very bad.. So maybe someone can remove p1405 , or all egr off. My Ols doesnt count checksum, but i think kess will do it. I used it for reading. Regards. File attached. Thnx and rep as always.

Ignasvw
7th December, 2017, 08:52 AM
491102And if im right this is dtc path?

johak
7th December, 2017, 09:33 AM
in this file I can not find the dtc table
try to read it with galletto

Ignasvw
7th December, 2017, 09:44 AM
in this file I can not find the dtc table
try to read it with galletto
You think that kess readed too small file? I found 1405 value just before that dtc path table if i am right. I tried to zero all that dtc path table but no luck

johak
7th December, 2017, 09:58 AM
i think that in your file there is no dtc table
view this file 1 post:
http://www.digital-kaos.co.uk/forums/showthread.php/631794-opel-dtc

Ignasvw
7th December, 2017, 10:09 AM
Johak, now im 100% that dtc table is before that path i found, because if i write 0000 instead 1405 then i get dtc p0000

johak
7th December, 2017, 10:29 AM
yes, your file is different

2xded
7th December, 2017, 11:26 AM
Ignasvw (http://www.digital-kaos.co.uk/forums/member.php/463834-Ignasvw) You need a full from car before 2002 - without the EGR.

Ignasvw
7th December, 2017, 11:35 AM
Ignasvw (http://www.digital-kaos.co.uk/forums/member.php/463834-Ignasvw) You need a full from car before 2002 - without the EGR.
I will try to read with galleto as Johak told. So far i found that dtc - when i change it to 0000 in obd test it shows p0000. Tried to shut off all dtc path. But i still have that foult. Tried to play with heal and debounce time. Since i dont know this ecu i cant solve this, but if i started i will solve this anyway. Maybe someone have ori file without egr? Regards

johak
7th December, 2017, 11:38 AM
if you want to try. I'm not sure!

johak
7th December, 2017, 12:58 PM
this should work

Ignasvw
7th December, 2017, 01:30 PM
This is the file i had readed with galleto. Now winols recognize it .