PDA

View Full Version : Bmw 520d 136 ps



delu
11th December, 2017, 04:56 PM
Hello, i have an bmw 2.0d 136 ps and at the moment i have an chiptuning on it but i don't know how many PS does it have and Nm. The max speed is 200 km/h. Can anyone read the ecu and tell me if it's good or not and the PS and Nm. Thanks a lot

DeSSeD
11th December, 2017, 05:01 PM
please post tuning file and original file . that all can look defferance

delu
11th December, 2017, 05:07 PM
I bought the car like this. I don't have another file. I had another 520d and that had 220-230 max speed and less fuel. The mileage were the same and that is why i asked if this tuned file is ok . Thanks
i have an original file from another 520d.

delu
12th December, 2017, 02:24 PM
Can anyone increase the torque, power and max speed for the first file? Thanks a lot

Ignasvw
12th December, 2017, 04:24 PM
Your max speed raised.

delu
18th December, 2017, 08:47 PM
i tried to write it but it gives an error at 83%, error SK1, error SilentKey. whay shoul i do? thanks

liam987
18th December, 2017, 09:07 PM
Write original file back to car and see if car starts

sdtsedat
19th December, 2017, 12:34 PM
Does the car start after write ori file? I understand that you write with galetto 1250/1260?
Best to use is kess or other tool for read write.

Ignasvw
19th December, 2017, 01:17 PM
my winols didnt recognized file that he read and i modified. Galleto doesnt correct checksum? Because he read it with g4 i guess

maajkii
19th December, 2017, 03:12 PM
no chks with gall for this ecu, if you need chks post file i will calculate it

delu
20th December, 2017, 10:31 AM
I read the file with gal v54, write with gal v54 and gal 1260 and same error. Write original with gal v54 and gal 1260 and car starts. only with the file with max speed corrected have problems. Thanks

delu
20th December, 2017, 10:56 AM
first is the original file with chiptuning and the second one with max speed off.

maajkii
20th December, 2017, 11:27 AM
chks was wrong.
here you have with good chks no pass

delu
20th December, 2017, 11:32 AM
i will try and report. Thanks