PDA

View Full Version : Opel immo solution without read hc11



scs-mem
28th October, 2009, 09:47 AM
Hi,
here solution for immo off in delco ecu without read hc11f1.
I use from 9 years with success.
Not forgot to push thanks button.
All the best
scs-mem

ngoncalo
28th October, 2009, 06:37 PM
Thanks friend for clock file. Im portuguease but now im in angola.
have you some good immo files for usa and japoneses cars.
One more time thanks

scs-mem
28th October, 2009, 09:51 PM
Thanks friend for clock file. Im portuguease but now im in angola.
have you some good immo files for usa and japoneses cars.
One more time thanks
Hi m8,
i havent immo solution for usa car and for japanese,
only some old toyota.
All the best
scs-mem

Mac Gyver
29th October, 2009, 06:20 PM
Hi scs-men,

you have some solution with a dump to resolve the error of RAM in the ECU MAGNETI MARELLI ?
here in Brazil only resolved this error by reprogramming the microcontroller MC68HC11.

scs-mem
29th October, 2009, 11:36 PM
Hi scs-men,

you have some solution with a dump to resolve the error of RAM in the ECU MAGNETI MARELLI ?
here in Brazil only resolved this error by reprogramming the microcontroller MC68HC11.
hi,
explane please
Br
scs-mem

jokersat
1st November, 2009, 12:13 PM
sorry dont work on Fiat Punto IAW 16F 27c512

scs-mem
2nd November, 2009, 09:56 AM
sorry dont work on Fiat Punto IAW 16F 27c512
Friend,
iaw 16f is marelli ,no delco.
B.r
scs-mem

bordi.di
22nd April, 2010, 01:25 PM
hi, im interested for a sollution Fiat-Delco Ecu with Fiat Code 1 System.
Sorry my English is very bad.

tinchocbr
26th April, 2010, 02:45 PM
Hi, tank for the file, but not work delco gm 8v, the memory is a 256k, the engine with 29f010 is a 16v but i dont have any ecu for probe.

senyor
26th April, 2010, 02:55 PM
Dear friends . nasratech company will release opel/vauxhal, Fiat pin reader
b.r.

Positron2200
17th May, 2010, 06:51 AM
Hi Friend. Can be used in ECU opel with M27c256B inside?

NILTON
2nd June, 2010, 03:49 PM
Hi,
here solution for immo off in delco ecu without read hc11f1.
I use from 9 years with success.
Not forgot to push thanks button.
All the best
scs-mem
hello friend SCS.
fordays Please pass me a wiring diagram of the addresses to feed the plant with the source?
which pins should I feed 12v?
addresses to which (+) positive and (-) negative?
I have a Delco blue omega 2.2 / 1996. Can I burn a 27C512?
because it seems that the original is a 27C256. help me please.
be very grateful.

maucontacto
17th October, 2012, 09:42 PM
Hello!!


I try to connect ECU outside of the car but the light don?t blink. My unit have an 29F010. Should i use the same method?

Regards

scs-mem
24th October, 2012, 02:15 PM
Hello!!


I try to connect ECU outside of the car but the light don?t blink. My unit have an 29F010. Should i use the same method?

Regards

Yes ,
but u must write the file 2 time in one 29f010,
from 0 to 7fff and from 8000 to ffff
Regards

ADUIR
2nd November, 2012, 01:17 PM
thanks for sharing the file

SRACHIDS
29th January, 2013, 12:33 AM
PASS PLEASE

gokey
29th January, 2013, 09:21 AM
pass for what ?

tomo776
28th August, 2017, 07:02 AM
Hi.
I have delco ecu with 29f010 inside.
Can I use 28f512 memory for clock
And after put back org 29f010?

Regards

jacques23
12th November, 2019, 07:06 AM
hi will this work for daewoo lanos with delco multec blue socket its got 27c256 at which pin do you connect the led thanks in advance

serkozy34
23rd November, 2023, 05:45 PM
teşekkür ederim

axigenc
12th January, 2024, 08:51 AM
tahnk you bro