Bmw Module FRM-E 2012 read upa-s

[automotrizVIP]

Hi mate,
I need help on how to read this module correctly upa-s
I found pinout with only 4 cables...
Link: https://4.bp.blogspot.com/-Q62r8qlh8UQ/WGRiwH6ggYI/AAAAAAAAFns/j23wSbtX4LcJHKuj9za1gLjuKmVGeoPVwCLcB/s1600/repair-bricked-FRM3.jpg
but I do not try to read and I only get "00"....
you have to use more cables, you need another pinout?...
Thanks in advance...


Bmw frm -e mask 3M25J 9s12xEG384

[rosak]

Why do you need more cables?

[automotrizVIP]

Well, it does not give me a reading ... with those 4 cables..
some trick to read it correctly?

[vasa]

Well, it does not give me a reading ... with those 4 cables..
some trick to read it correctly?
if isnt secured mcu no need more cable connect:-)

[tech_cz]

What are you reading EEPROM, DFlash OR PFlash?
Probably EEPROM corrupted.

WBR, Marek

[automotrizVIP]

The conection then read "00"...
I try to read D-flash and P-flash tried to repair

[rrador]

That connection is correct. I had some trouble reading FRM with upa-s also can't remer what. But with xprog box works perfect.

[antenor]

SEE these vídeos.

https://www.youtube.com/watch?v=qw0saCTakMI -- XProg
https://www.youtube.com/watch?v=kOKB14EA6Js&t=11s -- UPA

[automotrizVIP]

Ok mate .... Now I understand how it works...
someone has a true complete from repair
D-flash, eeprom, p-flash... to all...
Thank you.
493090

[automotrizVIP]

IS IT NORMAL TO BE DAMAGED AFTER THE BATTERY IS CHANGED?
The customer says that after this happened, there were many faults in the car....
then on other occasions I used the Scanner Autel XXX to solve this and it worked for me but now in this car this solution has not worked ...
can someone help me with a good file for this car?

[vasa]

IS IT NORMAL TO BE DAMAGED AFTER THE BATTERY IS CHANGED?
The customer says that after this happened, there were many faults in the car....
then on other occasions I used the Scanner Autel XXX to solve this and it worked for me but now in this car this solution has not worked ...
can someone help me with a good file for this car?

yes is normal so when is battery low damage EEprom

[antenor]

IS IT NORMAL TO BE DAMAGED AFTER THE BATTERY IS CHANGED?
The customer says that after this happened, there were many faults in the car....
then on other occasions I used the Scanner Autel XXX to solve this and it worked for me but now in this car this solution has not worked ...
can someone help me with a good file for this car?


You have to do it as is in the videos that I put. With D-Flash you generate the EEPROM.
Read the D-Flash and put it here.

[automotrizVIP]

has already been solved
reading with upa-s was a success. and equal programming.
although I would like to have the software that a colleague used here.

[antenor]

has already been solved
reading with upa-s was a success. and equal programming.
although I would like to have the software that a colleague used here.

This website can do it!
http://tlvps.tomvanleeuwen.nl/frm/

[automotrizVIP]

if I read it for there in the forum.
which my colleague uses shows you
vin oem; -------- km:-------- numer keys;---- numer part: ------ otros-----

[antenor]

Yes, but you need pay for that program.

[kono]

did you fix frm? usualy eeprom have some problem and delete few columns. Just push file from any frm. after that you have alive frm. program them through obd with istap or winkfp and code to car to accept vehicle order. all done.
if you need help/have question send me pm

do not forget magic button :)