Citroen Berlingo (2009) Milage/Odometer correction

[Myjector]

Hey Guys,

I want to modify the milage of an citroen berlingo 2009.
And i'm googleing already an long time, but i still dont know what tool i need to purchase and i have no clear instructions found for tis car
Can you guys help me with that?
The information that i allready know is that reprogramming is needed in the bsi by Nec and an second time in the odometer by the eeprom if i'm correct?

Best Regards Nico:tears_of_joy:

[brend]

For eeprom best tool TL866CS.
And if eny members help you dont forget magic button for thanks . Good luck.:)

[Myjector]

Hi brend thx for your feedback.
So will this tool be ok for the bsi also?
I would be happy to Find an instruction and the tools that i need. Ok i will ;)

[antenor]

With UPA you can do the work. It's cheap and good.
Berlingo 2009 has EEPROM at BSI and TACHO.

[brend]

Hi brend thx for your feedback.
So will this tool be ok for the bsi also?
I would be happy to Find an instruction and the tools that i need. Ok i will ;)

Yes upa good tool to.
For future magic button :itsme:
...........:wink:............

[Myjector]

With UPA you can do the work. It's cheap and good.
Berlingo 2009 has EEPROM at BSI and TACHO.


Thx for the feedback, what chip reference is it for the BSI and Tacho?
What do i need to do first , BSI ore Tacho before i connect everything?
Do you guys have an instruction where the chips are located?
For Peugout 206 (2002 model) with jager is it the same?
Best Regards

[nikz]

dash 95020
bsi 95128 or 95160

[Myjector]

Can i use Tacho 2008 to reprogramme the eeprom's? or is the UPA tool better?

[nikz]

UPA tool better

[Myjector]

UPA tool better

As example: http://www.dx.com/p/upa-usb-serial-programmer-full-adapter-obd2-diagnostic-tool-red-252110#.Wjd5X1XibNI

[Myjector]

Can i do this with Ponyprog also? and an serial gate?

[nikz]

yes you can and with Ponyprog

[antenor]

Can i do this with Ponyprog also? and an serial gate?


Any programmer who supports the 25XX or 95XX family, does.
Attention to the reading and writing of the eeprom, if the programmer does not read or write well, the car no more starts.
Ponyprog very careful
.

[Myjector]

Any programmer who supports the 25XX or 95XX family, does.
Attention to the reading and writing of the eeprom, if the programmer does not read or write well, the car no more starts.
Ponyprog very careful
.



Thx for the feedback!
Well i orderd the TL866CS and the 150mil SOP8 adapter yesterday
And EEPROMS 95020, 95128 and 95160 SOP8.
Now my question, when i get my tools i would like to de-solder the original eeprom from the dash and bsi and copy them to the new eeproms that i order and modify the milage in the new eeproms.
Is that an good idee so i have the original eeproms when something goes wrong?
If i put the files here can you guys adapt the files with the new milage or can you explain which text i need to modify and how the code is written?

[nikz]

post dumps here somebody will help

[Myjector]

Hey Guys,
An Merry christmas to you all!

Question, i take out the bsi board yesterday to have an look wich eeprom i need to remove.
But the board and plastic have an humiseal coating, can i easely remove?

And can you show me wich SOP8 that i need to remove on the board?

Best Regards

[nikz]

--------------------------------------------