hyundai i30 airbag

[matarelec]

Hi mates,
Please i need your help to clear crash data for hyundai i30 with module 95910-2L030 with eeprom 25640.I have fault code with FIS front impact sensors.
Thanks in advance,
Best regards.

[CarCity]

Hi mates,
Please i need your help to clear crash data for hyundai i30 with module 95910-2L030 with eeprom 25640.I have fault code with FIS front impact sensors.
Thanks in advance,
Best regards.

Your file :

( Please not forget reputation button )

[matarelec]

Thank you mate for reply but it i am sorry it did not work...i got extra fault code(internal fault-replace SRSCM) also the FIS faults still there

[hexguru]

If only FIS error check sensor and wiring, FIS-Front Impact Sensor

[goblincalm]

pass in pm

[matarelec]

thank you mate but i am sorry it did not work...i also got (internal fault)

[alismotors]

Original dump : 95910-2L030DP+PT+SCAB+PAD 07/09/1806550EGJ210111
Error codes:
1) B1329 FIS Driver communication error
2) B1334 FIS Passenger communication error
report, pass in pm.

[matarelec]

Thank you mate for reply but i am sorry it did not work...i got a new fault code (internal fault-replace srscm) beside the original fault codes(FIS defect).

[dragon100]

Compare with previous solutions , try and report, if you changed bad elements and fix wiring, it should work.

[matarelec]

mates,please i have a question about front impact sensors....if the car crashed should i change these sensors or can i use them again of course after erasing the crash data from the airbag module?I have tried other 2 sensors from the second hand but i still have the same fault that both front impact sensors are defective.Of course I have checked wiring and it is okay.

[automotrizVIP]

Code inf scanner dct?.......
what scanner do you use?

[dragon100]

Yes Auto is right ....

[matarelec]

Thank you dragon100 for reply but i am sorry it did not work....no internal fault but i still have the same faults that front impact sensors are defective...i am using launch scanner 5C

[dragon100]

Replace sensors from good car and check ...

[automotrizVIP]

Here .... http://www.autohex.net/dtc-help/hyundai/41/2011/4554/B1333/

[matarelec]

Thank you mate...i have checked the wiring and it is okay....it would be either the FIS sensors are defective or the crash data in srs module.

[alismotors]

if to change places of a wire on the sensor, then even at the good sensor there will be error ..