PDA

View Full Version : Astra 1.9 DPF OFF help



dudson86
18th December, 2017, 08:21 PM
Hello, please help me in dpf off in Astra 1.9, 2006MY. It is EDC16 ECU. Dump in attachment. Thank's for help.

mahmoud122
18th December, 2017, 09:24 PM
hi, this your file

maajkii
18th December, 2017, 11:32 PM
hi, this your file

Hehehe 90% dtc off :D
Ads isn’t solution


Wysłane z iPhone za pomocą Tapatalk

voltechcar
19th December, 2017, 12:40 AM
this is good solution, write and remember press him THANKS !!!!:applause::applause::applause:

dudson86
19th December, 2017, 03:33 AM
this is good solution, write and remember press him THANKS !!!!:applause::applause::applause:

I will test and report. But i am interesting how you both wrote opinion without downloading file that is also password protected :D

maajkii
19th December, 2017, 03:13 PM
I will test and report. But i am interesting how you both wrote opinion without downloading file that is also password protected :D

voltechcar post was sarcasm...
this file is shit mate, after 1000km you get limp mode.

mancioks
19th December, 2017, 09:03 PM
For edc16 will be no limp mode i think :)

maajkii
19th December, 2017, 09:36 PM
For edc16 will be no limp mode i think :)

so you need to learn a lot. :)

alex09
20th December, 2017, 12:04 AM
so you need to learn a lot. :)
Helllllloooooooo maajkiiiiiiiii, my old friend, can you just check this file and tell me is there something wrong with it. Because i am been driving this car for 2 years with this file. No limp mode, no regens, no smoke.... AND with remap. and this is swiftec solution, you said is not good for edc16c9\39. Just being curious.

maajkii
20th December, 2017, 12:07 AM
Helllllloooooooo maajkiiiiiiiii, my old friend, can you just check this file and tell me is there something wrong with it. Because i am been driving this car for 2 years with this file. No limp mode, no regens, no smoke.... AND with remap. and this is swiftec solution, you said is not good for edc16c9\39. Just being curious.

What file?
Yes swiftec solution is wrong for this ecu ( too much changes )
Ess do this ecu right, but best is manual solution.


Wysłane z iPhone za pomocą Tapatalk

alex09
20th December, 2017, 12:15 AM
Just uploaded, but nothing is wrong, it shows all the dtc that is supposed to. only 1 i know is not showing and it can give you limp mode and not showing dtc is temp sensor before dpf. But its rarely happening. Ess does some other stuff bad, some good, same with swiftec. Nobody is perfect :chuncky: