Fiat Ducato 250 BCM 95160 immo pin

[checka]

Hi everyone! Need detect immo pin from BCM Marelli eeprom 95160. Thx!

[CarCity]

Hi everyone! Need detect immo pin from BCM Marelli eeprom 95160. Thx!

Your dump is virgin ? I not fund PIN

Please read again

[Bllinda]

Try .... 25833

[checka]

I tryed with Digimaster and Tl866 same, it work with 3.0 EDC17CP52 ECU can be that no pin in bcm?

[checka]

I think I know where is problem, it last model with 95640. I saw it in VVDI2 . I need full dump. I try to clone, no luck. abrities can`t connect to this BCM to read pin or learn keys direct.

[Bllinda]

So hard to see ....?


I tryed with Digimaster and Tl866 same, it work with 3.0 EDC17CP52 ECU can be that no pin in bcm?


Try .... 25833


I think I know where is problem, it last model with 95640. I saw it in VVDI2 . I need full dump. I try to clone, no luck. abrities can`t connect to this BCM to read pin or learn keys direct.


Thanked 2 Times in 2 Posts

[checka]

No))) of course not, but abrities and vvdi2 cant connect to learn key with pin... vvdi2 need full dump 95640 to make master key

[autochei]

Dump recognized: OK
Programmed keys: 2
ISK: 38 98 25 FB E5 23
PIN: 25833
Part#: 504440002513
VIN#:


now u have code pin but u don t have proper tool for programing by obd avdi can if u have active license

[checka]

witch tool can do it? Diagbox work with Ducato? avdi I have only from china and it cant do it. vvdi2 to make master key need dump, but all 3 options for ducato 250 shop "wrong dump file" in immo dump tool. clone HITAG... work not.

[checka]

And I need working remote control. I have new pcf7946 and old pcf7936.

[checka]

up............

[checka]

So... Its really 95640. VVDI2 have recognized dump and I hit "Make a master key", write new dump to BCM but no luck. I need to learn it with tool? can Diagbox working with Ducato()I have now driver problem with diagbox.

[rob h]

multiecuscan

[ypiter]

So... Its really 95640. VVDI2 have recognized dump and I hit "Make a master key", write new dump to BCM but no luck. I need to learn it with tool? can Diagbox working with Ducato()I have now driver problem with diagbox.

VVDI2 don't write remote control, only pcf7936

[checka]

So I've connect with multiecuscan, precode is not working by vvdi, "transponder is damaged" in vvdi it locked . I have not understand, can anybody precode pcf7946 immo and remote with dump or pin? And send it. Or any other solution?

[ypiter]

Unlock chip by vvdi, write default cryptokey vvdi and write chip by diagnostic multiecuscan.
Cryptokey chip in PM

[nawigorzow]

Hello, need calculate pin from dump. BCM Magneti Marelli 95160 Fiat Ducato. THX

[rafal]

22421........................