PDA

View Full Version : EGR off on 1.9 TDI help



fr3es7yle
19th December, 2017, 04:55 PM
Hello everybody, i got a question about my Seat Leon 1.9 tdi 110hp 2003 1M. So i deleted the EGR hardwere system and i put straight pipes on intake. The problem is when i drive the dashboard shows Engine symbol which means problem with the EGR system (In my case). I bought a cable and software to delete it in the car ECU. The ECU is EDC15 and i know how to stop the signal to the valve which control the EGR by making all numbers to 850, but the problem with the Engine symbol still exist. So i want to ask how to delete the error code in the ECU ? Is it hard to do it by myself ?

maajkii
19th December, 2017, 04:56 PM
post file, i do it in 1min.
and post your dtc code.

fr3es7yle
20th December, 2017, 11:41 AM
Thank you, but what is this DTC code ? And where i can see it ?

maajkii
20th December, 2017, 11:43 AM
check what fault codes in engine do you have with any diagnostic tool

fr3es7yle
27th January, 2018, 05:41 PM
Hello, sorry for late answer. So i get the file. Please do the EGR off. The error code which i got is:

19586 - EGR System
P3130 - 35 - 10


502320

Ignasvw
27th January, 2018, 06:06 PM
Egr map set to 850 doesnt work on pd engines. You need to do it by hysteresis, and no foults will come


Sent from my iPhone using Tapatalk

fr3es7yle
27th January, 2018, 06:17 PM
I am gonna wait for maajkii to respond on my question, because i dont know how to total clear the code.

Ignasvw
27th January, 2018, 07:38 PM
You can try set values to 800, foult shouldt come. But block vacuum pipe


Sent from my iPhone using Tapatalk

maajkii
27th January, 2018, 10:54 PM
Make hysterisis solution or like ignasvw say, fill with 800 And block vaccum pioe.


Wysłane z iPhone za pomocą Tapatalk

fr3es7yle
28th January, 2018, 02:40 PM
Thank you, i did that but now i have different problem. MPPS V16 which i got yestarday is working sometime. I mean first time i successfully read the car ECU. Then day after that, the program wont start, i made virtual windows machines with win7 and win XP , and just one of 50 times the program start successfully. So basicly i made the changes on the file, but the program doesnt start in my car to upload it ... Is anybody have some experience with MPPS V16 ?

Rad4
28th January, 2018, 02:52 PM
Thank you, i did that but now i have different problem. MPPS V16 which i got yestarday is working sometime. I mean first time i successfully read the car ECU. Then day after that, the program wont start, i made virtual windows machines with win7 and win XP , and just one of 50 times the program start successfully. So basicly i made the changes on the file, but the program doesnt start in my car to upload it ... Is anybody have some experience with MPPS V16 ?
here you files


no pass ,block the vacum pipes after files ,if have agean dtc ,i stop him ,write and report me :)


dont fargot thx+ rep

fr3es7yle
1st February, 2018, 08:14 PM
Hello again, its done. I did it without "Rad4's" (BTW thank you) file. I made all the values to 850 (which means 0% activity). And the ECU stop sending error messages about the EGR system. So my car is with diesel injection pump and it works fine - so everybody who wants to do that on 90 h.p. and 110 h.p. 1.9tdi cars can get successful results with making all the numbers to 850. Cheers!