PDA

View Full Version : Mb sprinter delphi crd2.35 ecu read



tiugrikas
21st December, 2017, 09:55 PM
Hi all dk friends . I got this type ecu first time and i need to make dpf off. I got ktag hw 5.001 and mpps v18 .which tool is better to use for it ? Cause if i use ktag its very sticky and easy to broke ecu opening both sides . So I need advices . Car is mb sprinter 2012y 2.2 cdi 129cv https://uploads.tapatalk-cdn.com/20171221/27f2a431e5a9c8be2d94b353b7ed5c75.jpghttps://uploads.tapatalk-cdn.com/20171221/9af4a16b730b5f3965eae52d52c4a074.jpghttps://uploads.tapatalk-cdn.com/20171221/722ac574f769921160a500d4f3be1404.jpg

Išsiųsta naudojantis HUAWEI TIT-L01 Tapatalk 4 Lt

voltechcar
21st December, 2017, 10:33 PM
kess read by obd or k-tag read boot mode

Ignasvw
22nd December, 2017, 09:31 AM
i bricked this ecu by obd with cmd. For flash i read it with usprog

bersch8688
22nd December, 2017, 10:09 AM
I Read and write this ecu by OBD with Kess V2 4.036 REWORK ---> PERFECT

tiugrikas
23rd December, 2017, 12:42 AM
Ok so my only way is ktag . Any advice how to open it safety ? Link or something cause i havent found info with complete details

Išsiųsta naudojantis HUAWEI TIT-L01 Tapatalk 4 Lt

2200
2nd February, 2018, 01:28 PM
Can you please upload ori file please?

ricco123
22nd May, 2020, 09:53 PM
Hi, I was just fighting at the moment with the same problem. Kess clone bricked the ECU by obd, but before that I've managed to read it and write it 3 times and on the 4th writing it bricked it, in the end it managed to recover it but I was lucky that I already had the original read, if not I don't know how I would have recovered it.

I'm posting my original file if someone needs it.

Regards,
Rick

Ihlberg82
1st January, 2021, 01:01 AM
I Read and write this ecu by OBD with Kess V2 4.036 REWORK ---> PERFECT


Which protcol did you use with kess 4.036? I cannot find crd2 in car list, only crd3

alfons37
14th January, 2021, 08:22 PM
Ktag not work for me, anyone can tell how i read with ktag?

figani
14th January, 2021, 08:40 PM
Ktag not work for me, anyone can tell how i read with ktag?

Normally it's simple...
Post photos of connections...

deyan4you
6th April, 2021, 10:35 AM
upp ? i have the same problem ... i read and write with kess but the car don`t start.