PDA

View Full Version : Kess Vivaro 2.5 DTI EDC16C36 or EDC15C2 which one to chose?



pluto2013
23rd December, 2017, 04:11 PM
Hello Guys,

Just received my Kess V2.
And want to try it on my vivaro 2005 2.5 135HP non CAN

Which one should i use in KESS V2?

Opel or the renault EDC15C2
Or is there an option in KESS to read what ECU it got.
494680494681

Thanks and merry XMas

88diablo
23rd December, 2017, 06:32 PM
With original if you choose wrong version it will suggest you use other protocol so presume clone does too.

omarino
23rd December, 2017, 08:02 PM
Hi
Take a look in your ECU and see a reference
Regards



Envoyé de mon iPhone en utilisant Tapatalk

maajkii
23rd December, 2017, 08:34 PM
2005y 99% edc16


Wysłane z iPhone za pomocą Tapatalk

pluto2013
23rd December, 2017, 08:45 PM
this is the one. How can i check which one is it?
494715

moky
23rd December, 2017, 09:14 PM
With original if you choose wrong version it will suggest you use other protocol so presume clone does too.

same with clone...same Software..problem is user !!

test you will not have problems on this type of ecus in reading...

ecu is edc15

gad3n
23rd December, 2017, 09:19 PM
edc15 mate ... moky is right

pluto2013
23rd December, 2017, 09:21 PM
same with clone...same Software..problem is user !!

test you will not have problems on this type of ecus in reading...

ecu is edc15

Thanx so i can just choose the Renault 2.5 15c of kess


Verzonden vanaf mijn iPhone met Tapatalk

moky
23rd December, 2017, 09:28 PM
just paste ecu number on www.googleXXX.xx and ... :pish:

pluto2013
23rd December, 2017, 09:54 PM
just paste ecu number on www.googleXXX.xx and ... :pish:

[emoji106]


Verzonden vanaf mijn iPhone met Tapatalk

smirnoff_rules
24th December, 2017, 07:00 PM
change speed to low in tools too


Sent from my iPhone using Tapatalk

pluto2013
24th December, 2017, 07:10 PM
Thnx All i have read the Vivaro, i chose Trafic 135HP it is EDC15

Merry XMAS

DR Race
11th February, 2018, 12:25 PM
Hi guys , i have a question about scenic 2 1.9 dci 130hp with edc16c36 ecu , can thus ecu type be done by obd with no trouble after ,I have read a lot o problem after flashing , rail pressure pump error , injector error , I have read in my kess instruction to read injector cod first and after flash do injector codify, a lot o people have done all ok , but still problem after codifying injector with kess !!!
Can this ecu be done by CMD slave with no problem , has somebody tested, I have no Renault Clip tester to coding !
Thenks in advance !

Trimis de pe al meu SM-G930F folosind Tapatalk