View Full Version : Read MCU of Old MB Keys Xprog-m
electrones
25th December, 2017, 10:51 PM
Hi friends
I need help to read a old key from MB E210 with MCU MC68HC05E6(0F82B) try out of circuit but without success, by UPA adapter 15 and xprog adapter by pinout. Someone here can help me with correctly pinout in circuit or out circuit, i have carprog, xprog, UPA, please!!!
kiszka
25th December, 2017, 11:01 PM
..........
kiszka
25th December, 2017, 11:24 PM
..........
electrones
25th December, 2017, 11:44 PM
connect to a CarProg programmer?
For HC05 programming use A10 cable 7 color wires:
YELOW – RX communication signal from MPU;
GREEN – TX communication signal to MPU;
BLUE – Reset signal to MPU;
ORANGE – MODB signal to MPU, low level;
BROWN – GND (ground);
RED – switched +5V;
VIOLET – switched +12V;
I helped press button thanks
494958
494961
494962
494963
494964
I helped press button thanks
Hi kiska
THanks friend
NO need lift any pins
Cheers
electrones
26th December, 2017, 04:30 PM
Thanks friend solved by xprog-m
https://www.key-programmer.com/2016/01/15/xprog-m-programmer-read-cpu-of-old-mb-keys/
cheers
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.