88diablo
28th December, 2017, 05:03 PM
Hi all, could someone guide me please - I read a 2007 Citroen C4 Picasso 1.6 Hdi ecu Bosche EDC16C34 with Magpro2 and used the hacked ECS software from DK to try and remove DPF and EGR. All was ok for 2 days but now car has come back with the following faults. Electric EGR valve position copy signal - CauseValve movementdrift or programming not done & Turbo pressure electrovalve control- Cause Excessive flow detected.
The car has had the DPF cut out and the EGR blanked.
Would somebody look at the files please and tell me if there is a real fault possibly with the turbo or if its just a bad delete file. Ive attached the original read and the modified file I wrote.
The car has had the DPF cut out and the EGR blanked.
Would somebody look at the files please and tell me if there is a real fault possibly with the turbo or if its just a bad delete file. Ive attached the original read and the modified file I wrote.