PDA

View Full Version : HONDA RNS2 FIS


patifon
28th December, 2017, 06:02 PM
I need code from dump.
8 618 000 300
08A40-086-2000-02
shooting
28th December, 2017, 06:08 PM
I need code from dump.
8 618 000 300
08A40-086-2000-02

FIS is a bad read

wbr
patifon
28th December, 2017, 06:30 PM
Dump is 24c64 PonyProg
shooting
28th December, 2017, 06:35 PM
Dump is 24c64 PonyProg

Is the same... can you post Serial number?

wbr
patifon
28th December, 2017, 06:38 PM
BP0300W0296067
shooting
28th December, 2017, 06:43 PM
BP0300W0296067

Maybe your programmer settings are wrong?
Post a picture of your connections points

wbr
patifon
28th December, 2017, 06:53 PM
is there a working dump with the code?
shooting
28th December, 2017, 06:56 PM
is there a working dump with the code?

If you are having problems reading then you will have problems writing,
if you write badly then you will end up with a brick......

wbr
kappa1
28th December, 2017, 06:57 PM
is there a working dump with the code?

If you not read ok not can write ok !
Try NAVI power on 30 sec after try to read selected to read 2432 or 2464 in ponyprog
i
patifon
28th December, 2017, 07:09 PM
Dump 24c64 24c32 new
shooting
28th December, 2017, 07:26 PM
Dump 24c64 24c32 new

This looks like you are reading eeprom not fis

wbr
fryderyk 10
28th December, 2017, 08:06 PM
Read as 24c16.
patifon
29th December, 2017, 07:54 AM
Dump is 24c16
Raimax
29th December, 2017, 01:32 PM
Dump is 24c16


Try to reduce the tension of the radio to 7v. Then read
patifon
29th December, 2017, 01:43 PM
I think this is a line of code 50 5D 2F E0 E0 3E 4D 16
patifon
11th January, 2018, 01:01 PM
is there a working dump with the code?
shooting
11th January, 2018, 01:04 PM
is there a working dump with the code?

If you are having problems reading then you will have more problems writing,
solve your reading problem first

wbr
patifon
11th January, 2018, 03:11 PM
is there a working dump with the code?
patifon
11th January, 2018, 03:12 PM
You need a working dump with the code.