PDA

View Full Version : problem aith audi a3 2004



wissamshaat
29th December, 2017, 01:47 AM
hello everyone
i have a problem same like this video no comunications to all can modules
only kline to ecu
tried other cluster and other gateway other multifunction module and other stearing colum module
even tried to unplug one by one to see if had comunications but nothing
all fuse checked
any one had this problem befor?
thank you

https://www.youtube.com/watch?v=k0kVzsIJ4KM

yssf
29th December, 2017, 02:39 AM
One module should probably be shorted,you said the car have gateway?
So the comm is through one optical cable not can,check that wire verywell


Sent from my iPhone using Tapatalk Pro

wissamshaat
29th December, 2017, 04:14 AM
the car is a 2004 it have optical??
i tried to unplug modules one by one

yugo45
29th December, 2017, 06:40 AM
Possible Central Convince module wake up signal bad .
Adi A3 do not have terminal 15 straight from ignition , it has wake up signal form CGW which will activate form 09- Cent Electronic module.

yugo45
29th December, 2017, 06:41 AM
One module should probably be shorted,you said the car have gateway?
So the comm is through one optical cable not can,check that wire verywell


Sent from my iPhone using Tapatalk Pro

A3 do not have optical!!!!!!!!!!!!!!!!

antho06460
29th December, 2017, 11:26 AM
White fis in a3 2004 ?

wissamshaat
29th December, 2017, 07:13 PM
495780
you are talking about this?
tried another one and nothing

honingkoning
31st December, 2017, 05:16 PM
495780
you are talking about this?
tried another one and nothing

Had a similar problem long tome ago there was 12v missing on the can gateway.

Wbr Adam.