PDA

View Full Version : HELP !


shotaaa
29th December, 2017, 03:53 PM
I have placed a second hand dashboard in vw polo 2010 (6r), only fault lights of abs tire pressure remain on.
I can not switch it off after reading and erasing thru obd.
Can someone help me with this.
brend
29th December, 2017, 06:36 PM
Abs coding???
SANCHELO
29th December, 2017, 08:20 PM
ABS coding flew 100%, on these cars it flies when correcting the run-up.
vasa
29th December, 2017, 09:33 PM
abs coding or cluster adapt is not corect. tire presure you can disable in abs coding
shotaaa
29th December, 2017, 10:20 PM
The abs light blink on the dash, tire pressure and ESP remain on.
I dont have condata from the previous cluster because it is broken.
I have changed the immo data on the second had cluster so it can match with the ECU and learned a new transponder.
the abs light blink, tire pressure and ESP remain on.I do not have condata from the previous counter because it is faulty, I have changed the immo data on the 2nd hand counter and learned the new transponder