PDA

View Full Version : JEEP CHEROCKY CRASH AIRBAG DUMP 2015 95128


ODBlue
30th December, 2017, 07:39 PM
Dear Mates

please I need your help


JEEP CHEROCKY CRASH AIRBAG DUMP 2015

T52MD196404442

68222888AA

95128

thanks in advance
ODBlue
31st December, 2017, 09:47 AM
any help please?
dragon100
31st December, 2017, 09:57 AM
Just use scanner and clear errors ...
ODBlue
31st December, 2017, 06:21 PM
every thing okay but I can't erase the trouble codes !
ODBlue
31st December, 2017, 06:22 PM
Just use scanner and clear errors ...


I tried my friend but I still had trouble codes, driver stage 1 and airbags! please can you check the dumb for me? I will appreciate that
dragon100
31st December, 2017, 06:32 PM
Join resistors 2,2ohm to plugs from driver's airbag and clear errors, join resistors 2,2ohm for plugs pretensioners and clear errors ...
ODBlue
31st December, 2017, 06:41 PM
AQUOTE=dragon100;3179367]Join resistors 2,2ohm to plugs from driver's airbag and clear errors, join resistors 2,2ohm for plugs pretensioners and clear errors ...[/QUOTE]


I got B00019A Driver frontal squib1control - component or system operating condition

B00029A Driver frontal squib2control - component or system operating condition

I'm confused because I used the resistors and still appear these codes!
dragon100
31st December, 2017, 07:41 PM
try use other value from 2,2ohm to 4,7ohm ...
repairmymodule
1st January, 2018, 07:34 AM
Could have a broken clock spring friend. Usually the horn and any buttons on steering wheel like cruise control and radio buttons will not work either.
automotrizVIP
1st January, 2018, 08:58 AM
Use 3.3R ohm my friend jeep use in airbag tool... to erase DTC using FVDI or advi.....if it does not eliminate you in a healthy way... ing on .... disconnect battery 30 seconds and put it back on, make contact ... ing on-in off
ODBlue
1st January, 2018, 10:48 AM
try use other value from 2,2ohm to 4,7ohm ...

I tried 3.3 and 4.7 and still same codes my friend.
ODBlue
1st January, 2018, 10:50 AM
Could have a broken clock spring friend. Usually the horn and any buttons on steering wheel like cruise control and radio buttons will not work either.

Yes you right but I used the resistors after the spring and same thing.
ODBlue
1st January, 2018, 10:52 AM
Use 3.3R ohm my friend jeep use in airbag tool... to erase DTC using FVDI or advi.....if it does not eliminate you in a healthy way... ing on .... disconnect battery 30 seconds and put it back on, make contact ... ing on-in off

I will try and report.
thanks for you and Dragon
ODBlue
4th January, 2018, 06:37 PM
problem solved, Software issue, case closed

thanks for Dragon100 and automotriz and repairmymodule