volter
31st December, 2017, 09:41 AM
Hi Everyone.
The car I'm struggling with is A3 3.2 2008 with DSG. I made a read with kess V2 through OBD modified software and tried upload it to the ecu, but something went wrong and Kess stucked at 50%.
After that the engine doesn't start, VCDS recognises just part number of the ECU, but It can't read Fault codes or measuring blocks.
I tried put original flash file in to ecu on the bench with K-Tag but it didn't help.
The last Idea is the ECU saved "incorrect flashing procedure state" in the eeprom, but I don't have enough knowledge to fix the content. Anybody of You fix it for me. please? Obviously I can pay for working solution.
Best REGARDS for You
You can download files from link below:
https://drive.google.com/open?id=1wo..._RTZwmEgO_ywqd (https://drive.google.com/open?id=1wo6TZGU0GdGcw6vAk7_RTZwmEgO_ywqd)
The car I'm struggling with is A3 3.2 2008 with DSG. I made a read with kess V2 through OBD modified software and tried upload it to the ecu, but something went wrong and Kess stucked at 50%.
After that the engine doesn't start, VCDS recognises just part number of the ECU, but It can't read Fault codes or measuring blocks.
I tried put original flash file in to ecu on the bench with K-Tag but it didn't help.
The last Idea is the ECU saved "incorrect flashing procedure state" in the eeprom, but I don't have enough knowledge to fix the content. Anybody of You fix it for me. please? Obviously I can pay for working solution.
Best REGARDS for You
You can download files from link below:
https://drive.google.com/open?id=1wo..._RTZwmEgO_ywqd (https://drive.google.com/open?id=1wo6TZGU0GdGcw6vAk7_RTZwmEgO_ywqd)