PDA

View Full Version : Ktag 7.020 reading VAG EDC17C64



martinre
2nd January, 2018, 09:15 AM
Hello,please,
i tried to use Ktag 7.020 eu clone for reading EDC17C64 Octavia3 with using a GPT caple. I used power supply 13V and current limitation to 0,5A, but when i press read i have strange current 0 ... 0,49 ...0... 0,49 and little worry about ecu because do not know how current it needs during identifiing. I tried ECU in the car after it and all is fine. Do you have some experience with this ecu ?

Thanks for your asnwers

Martin

rafalgt
2nd January, 2018, 09:23 AM
I think, problem is current limitation.
ECU need more current when sturtup. EDC17 could need 2A, Siemens SID807 need mor than 3A...
On idle 0,5A. It depands on the ECU construction.

martinre
2nd January, 2018, 09:38 AM
I think the same too. But really do not know how limitation is enough for this ECU, have power supply 5-18V, 5A max. Do you think i can try to use 2A limitation ? Do not want have toast from ecu :D

teerak2uk
2nd January, 2018, 10:02 AM
I use a 10amp supply then ecu can use what it requires upto 10amp

sdtsedat
2nd January, 2018, 10:23 AM
Is it not possible to read this ecu with kess V5.017 on obd?

martinre
2nd January, 2018, 10:38 AM
I do not know. Prefer to R/W EDC17 on table.

icezero2010
2nd January, 2018, 11:06 AM
I do not know. Prefer to R/W EDC17 on table.

give more power 1 amp is ok in normal mode without boot the ecu need 0.6-0,8amp to read pass . that the ecu go on off is normal this is a ecu reset . ktag need long time to read gpt pass 15-30 min .

check also boot bin

with kess you can write on obd no problem also with clone

luca22
2nd January, 2018, 11:09 AM
Is it not possible to read this ecu with kess V5.017 on obd?

Only ori tool KESS v2 do that ECU on OBD, but is Virtual READ from alientech database and writing after modification via OBD :)

Do it many times, work perfect ! :)

In this month ori kess has update to version 3.0 and all BMW F series can read/write/CHS by OBD!!! :)

Regards
Luca

sdtsedat
2nd January, 2018, 12:44 PM
And with new update ori tool kess v2 bmw F series also virtual read?
And EDC17c64 full read and wirte?

I see my eu clone kess, i can write with kess, can i use this function? What happens when i put (flash) modded with same ecu file?

voltechcar
2nd January, 2018, 01:02 PM
you must have virtual read not full, when you put full flash he say error file. Yes in F serie we have virtual read in data base alientech

sdtsedat
2nd January, 2018, 01:10 PM
So i can virtual read with kess clone? on Edc17c64 ?

teerak2uk
2nd January, 2018, 01:27 PM
So i can virtual read with kess clone? on Edc17c64 ?Always a risk!!

ID it and get a good tuner to supply you with the file

voltechcar
2nd January, 2018, 01:57 PM
how? you have the clone and this not download file from database

teerak2uk
2nd January, 2018, 04:21 PM
how? you have the clone and this not download file from databaseUse a tuner/file supplier with genuine tool

chli1976
2nd January, 2018, 08:07 PM
Post ID
When i have this file i can make you a frf to bin, it is the same as virutal read

chli1976
2nd January, 2018, 08:08 PM
with kess you can write on obd no problem also with clone

What Version of clone 2.23/5.017 ?

teerak2uk
2nd January, 2018, 08:41 PM
Chinese clone will not do some because of file size problems and leave you possibly with a dead ecu

motorsport
2nd January, 2018, 08:56 PM
Post was ktag and switch to kess [emoji848]

daniel guerra
2nd January, 2018, 09:32 PM
I've read and write EDC17C64 with china clone 7.020, took around 15/20 minutes to read and around 10 minutes to write more or less.

voltechcar
2nd January, 2018, 09:42 PM
how? no unlock otp and programing?

daniel guerra
2nd January, 2018, 10:02 PM
GTP cable. Followed the instructions and it was fine.

I didn't wrote in the OTP area. OTP area can't be programmed as name says everything. I've change some maps and wrote without any problems.

voltechcar
2nd January, 2018, 10:08 PM
yeah, you open ecu. I wite about by obd not in boot mode

daniel guerra
2nd January, 2018, 10:15 PM
The topic is for KTAG, by OBD you've to unlock it first and i'm not sure if can be done with latest kess clone.

icezero2010
3rd January, 2018, 12:29 AM
The topic is for KTAG, by OBD you've to unlock it first and i'm not sure if can be done with latest kess clone.

you donīt need any unlock to write with kess clone work since ksuite 2.08 4.036 firmware

maajkii
3rd January, 2018, 12:37 AM
guys you are realy brave to flash edc17 with not genuine tools... im always shaking when i do this with genuine tools... i cant imagine to do this with clone.... :D
bravevbrave

daniel guerra
3rd January, 2018, 07:06 AM
guys you are realy brave to flash edc17 with not genuine tools... im always shaking when i do this with genuine tools... i cant imagine to do this with clone.... :D
bravevbrave

Get spare ecus and do the tests on spare ecus, this way you only shake a little bit. I do shake a little bit too :peaceful:

vrsho
30th August, 2018, 12:50 PM
you donīt need any unlock to write with kess clone work since ksuite 2.08 4.036 firmware

Are you saying i don't need to open ecu and make the unlock for writing a new map?

hameharis
27th July, 2019, 04:16 PM
Can you hellp to me. I read backup to my computer. I nead to write that file to ecu EDC16u34 but KTAG show error. operation not alloved. Can you hellp. What I nead to use to flash my ecu?? reagards

This is link

https://www.youtube.com/watch?v=YBi9IUfIVVc&t=6s

barteczekk
29th August, 2019, 10:00 PM
delete box - Restore then select proper file to write if eprom select *.epr ect.