Question PINOUT Fiat

[sdtsedat]

Hi everyone,

I try to read Fiat Bravo 1.9JTD from year 2000 but car don't have OBD port.
I found only old obd with 2 pin in the engine room.

So read/write is not possible.

Can i do this with bootmode or pinout? Or need to remove desolder eeprom 28f400
I don't see anything on ecu like EDC15c7 or anything.
Ecu number 0281001928

So when possible with pinout, who have image?

Thanks!

[morgano]

It is edc15c5.7 according the 0281... number, guess on the two pin obd connector you will have GND and KLINE. Just route these two pins to your tool obd2 plug and try to read as normal obd plugged car. GND to pins 4&5 and KLINE to pin 7 on your tool obd2 plug.

[kamsky]

Probably this is edc15c5.Remember of the boot pin 28f400.Mpps v13 have procedure of generic read edc15.

[Kisu1337]

EDC15C7

497212

[sdtsedat]

EDC15C7

497212Is this the correct pinout?

Verstuurd vanaf mijn SM-A520F met Tapatalk

[rafal]

pinout edc15c fiat alfa

[sdtsedat]

Thank you works ok!

regards