View Full Version : MB Sprinter 316 CDI Delphi CRD3.20 DPF Off
Rocknsock
9th January, 2018, 02:32 AM
Hello,
I read this ecu with KTag and used Swiftec solution to DPF Off.
First time car starts with no DTC and everything seems to be ok, but every second time I try to start the car, It starts but immediately shuts off with P0601..
Its it a checksum problem or a Swiftec solution problem?
Thanks
voltechcar
9th January, 2018, 09:09 AM
swiftec have total bad solution, all dpf off in MB bosch ecu have terrible
Rocknsock
9th January, 2018, 08:55 PM
Can someone give me a hand?
voltechcar
9th January, 2018, 10:42 PM
here you are
olds 454
10th January, 2018, 01:20 AM
try this works fix
Rocknsock
10th January, 2018, 04:23 PM
It gives me always de same dtc and it doesnt start p0601...
I think its a checksum problem...
Enviado do meu SM-G925F através do Tapatalk
zweriz
10th January, 2018, 05:02 PM
Try with (star)development
olds 454
11th January, 2018, 01:01 AM
how did you Flash?
Ignasvw
11th January, 2018, 09:10 AM
file is bad readed
Rocknsock
11th January, 2018, 02:38 PM
how did you Flash?Boot with KTag
Enviado do meu SM-G925F através do Tapatalk
Rocknsock
11th January, 2018, 08:20 PM
file is bad readedHow come?
Enviado do meu SM-G925F através do Tapatalk
divagomania
19th October, 2018, 11:31 PM
I had same problem. All is fine. For what I understand you need to program it through OBD for checksum to be uptaded in EZS.
Someone correct me if I am wrong.
I know this post is old but hope this helps others.
Resume: flash it with kess through OBD.
jakkeviet
20th October, 2018, 08:12 AM
you can flash file kess opd or k-tag tables
if you have correct file ezs not problem
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.