is there someone that knows russian? (NATS-5 v2 app)

[sixpack]

it's from the Nissan NATS-5 v2 app posted here on the forum, i need the k-line interface schematic for it

i need to have this translated :

[frosted]

Very quick translation:
Pins for Immo Unit:
1- Line (Connection to K-Line)(First pin from the coil!)
4- Gnd
6- LED
7- +Ign (12v)
8- +Batt (12v) (Send both voltage to +Ign & +Batt)

To start program double click on second letter "S" in word NISSAN at the bottom of the window, there should appear dot at the end of the word "Adapter".
Thats all, connect to diagnostic connector, as scripted above and click СТАРТ, there will be CPU-related window.

PS All you do you done at your own risk !!!Always Save original dump!!!

Good Luck, rio

[Meat-Head]

might be worth posting this in the general disscussion forum, would not thought it matters if a non car, non technical person reads it, as long as they understand the words!

[sixpack]

might be worth posting this in the general disscussion forum, would not thought it matters if a non car, non technical person reads it, as long as they understand the words!
this is software related so it stays here

[sixpack]

here is the program, did someone actually work with this soft ?

[Jur]

This soft work.I tested.

[sixpack]

This soft work.I tested.
can you tell me exactly how this works and how the connection looks from diagnostic socket to com (schematic)?

[z786]

the picture isnt of an obd port, im assuming its the connector of the key box???
schematic wud be gud

[vares]

Usual K-line adapter connect directly to ecu pins.

[sixpack]

Usual K-line adapter connect directly to ecu pins.

what is the connection to com then ?
do you have a schematic of this ?

[z786]

Usual K-line adapter connect directly to ecu pins.

ecu pins or keybox pins???

[Mr_Fix]

K-Line adapter connect to 1-th pin immobiliser. ECU don't connect.
See also http://www.digital-kaos.co.uk/forums/f114/nissan-navara-2005-a-63267/

[elektro128]

software work only immo box
ST and TMS

[sixpack]

sorry but i still dont get it, where to connect, what is the pin-out for com and pin out for ..... what ever to connect to

[elektro128]

com port rs232?
or
k- line?

regards

[sixpack]

com port rs232?
or
k- line?

regards
both..........

[elektro128]

you need interface K-line example made on max232.
K- line intrface - connect to 1pin immobox nissan.

add power supply immobox
4- Gnd
7- +Ign (12v)
8- +Batt (12v)

and all

[z786]

Any luck with this sixpack??????????

[sixpack]

Any luck with this sixpack??????????
do you have a solution to ?

[cammy25]

Did you try to connect any KKL interface?
I dont have a NATS immo unit else i can try.

[milkatrek]

i try with k-line com interface and not working. I have message ecu not responds.
I have 2 im*obox with tms+st processor. Steps 5/5,6
5wk4 8042A_G 43574A - pin 5732
5wk4 8042A_R 42432A - pin 5908

Maybe someone check is correct that pin?


kline im*obox
7-----------1
16 +12V 4 gnd
4 GND 7,8 +12V

[m3m5]

max232 hardware for writte in deco motorola works?

[milkatrek]

deco motorola? i dont understand.

[m3m5]

I've got max232 for writte eproms, but is special hardware for read im*o?
I add picture.

[g6et]

it's from the Nissan NATS-5 v2 app posted here on the forum, i need the k-line interface schematic for it

i need to have this translated :


This is the best translation I can Find.
Hope It helps.

[sv-drive]

Hello Im from russia . I try this but working in 50%
PINOUT im*o Unit:
1 Line (CONNECT To K-Line) (the first leg from the coil!)
4 Gnd
6 LED
7 Ign (12v)
8 Batt (12v) (To submit both of feed Ign and Batt)

To start a program-press a mouse (twice) on the second letter "S" in word NISSAN in the bottom of a program, thus there will be a point in the end of a word "Adapter".
Everything, connect to a socket as it is described above and press START, there will be a menu for work with MICROPROCESSOR.

PS all do at own risk OFF COURSE!!! Keep always original DUMP!!!

[milkatrek]

i try with that same scheme
twice s button then adapter . and ecu not respond.

[Highvolt]

http://www.digital-kaos.co.uk/forums/newattachment.php?do=manageattach&p=

I have one question , I know all pins where to connect (K-Line , Rx, Tx, 12+ , ... etc)
but the 5 VDC to where I have to connect , there is no 5 VDC in PC Com1