PDA

View Full Version : PEUGEOT 206 RHY REMAP



geomesh
12th January, 2018, 06:32 PM
Hi,need to remap this peugeot 206 2000hdi RHY engine HW 0281010250 SW 1037359222 UPG.SW 1037353965
need more power and torque,but have in mind car is 300k,though working quite good
maps read with kess v2

voltechcar
12th January, 2018, 09:12 PM
this write...

geomesh
13th January, 2018, 12:38 PM
sorry,remap is not good:smoke and engine cuts out and stops

voltechcar
13th January, 2018, 01:54 PM
parameters? turbo fuel, air? what dtc?

goyodesanctis
14th January, 2018, 09:29 PM
Test this file mate, and tell me how it works, I have done a lot of HDI cars.Pass PM.
If I helped press thanks.
Regards.

goyodesanctis
15th January, 2018, 05:22 PM
sorry,remap is not good:smoke and engine cuts out and stopsHaye you tested? I hope you could report. Regards!

Enviado desde mi Hisense L671 mediante Tapatalk

geomesh
15th January, 2018, 06:21 PM
Send the password,mate and clean your pm

goyodesanctis
20th January, 2018, 03:00 AM
Send the password,mate and clean your pm
Have you can download and test? Regards

geomesh
20th January, 2018, 08:49 AM
Have you can download and test? Regards

I can not open the file, may be corrupt or wrong password,

make a new archive file and post with new password.

Clean your private messages. Your inbox is not working.

goyodesanctis
20th January, 2018, 11:00 AM
I can not open the file, may be corrupt or wrong password,

make a new archive file and post with new password.

Clean your private messages. Your inbox is not working.

Okk I will try today

geomesh
21st January, 2018, 02:30 PM
Тhis time the car is not smoking, but engine still cuts out and stops. Any ideas ???

geomesh
21st January, 2018, 02:31 PM
:peaceful:

voltechcar
21st January, 2018, 06:13 PM
yes, you have no idea what engine works...... You need tune but you can only write someone file......... Where is parameters, what you check ?????? of course nothing

geomesh
21st January, 2018, 06:42 PM
Sorry,but what kind of parameters you want to see,I gave a stock dump,asked for remap stage 1,tried your file and the result was not good,if you are an experienced tuner what else you need,i do not understand..

geomesh
22nd January, 2018, 03:56 PM
Tuning specialist wanted/dont want to insult people that sent me files/ I asked for help with this 206 hdi and received three different files and tried them,yes engine has more power and torque with every file but always cuts out and stops at different revs!!!and smoke with the first one
I put back original and all is ok,i am not experienced in tuning at all,so thats why i ask somebody/I KNOW there are many professionals here/to mod this dump so that to increase power and torque without smoke,stops and so on
here are the three mod files mentioned above..

sonic 1989
22nd January, 2018, 05:21 PM
good file chip tune voltechcar, only make map "air temperatura limit boost pressure" and map SOI

goyodesanctis
22nd January, 2018, 06:26 PM
Do you have PP2000 access???
No problem,normally I don't have mistakes,no problem I repeat,last week I made a 2.0 HDI RHS 307 Peugeot and everything is ok,I have raised maf limit 6x1 and calculate AFR to get not smoking.
Tell me the DTC Code and I can adjust more the file.
Regards mate

goyodesanctis
22nd January, 2018, 07:01 PM
NO GOOD FILE.
Duration is false.A lot from 2500 rpm.
Rail pressure not modified.
SOI for high IQ not scalled an not modified.
Turbo vs IAT for more pressure than stock,keep values.
It's my opinion and nobody can make see me another thing.
Is normal that car smokes a lot.

Sorry if anyboy don't like it but it's my opinion.
If you have any eobd scanner report dtcs and take a look for injectors return line to get the same amount of diesel in 4 cyninders.This cars usually have a one or two in bad condition and this is the normal cause.ç
Check values of Rail pressure,and take a look for pressure sensor cables to ECU with multimeter.
Regards

goyodesanctis
22nd January, 2018, 07:42 PM
Tuning specialist wanted/dont want to insult people that sent me files/ I asked for help with this 206 hdi and received three different files and tried them,yes engine has more power and torque with every file but always cuts out and stops at different revs!!!and smoke with the first one
I put back original and all is ok,i am not experienced in tuning at all,so thats why i ask somebody/I KNOW there are many professionals here/to mod this dump so that to increase power and torque without smoke,stops and so on
here are the three mod files mentioned above..
The password is the same as before.
I want you to analyze your previous words carefully.
It seems to me in very bad taste, that three people help you, and you just think that maybe we do things wrong, and I can assure you that I have made more than a hundred RHY engines even with SID 801 / 801a.
So be careful, with these words, because for less than nothing, one is sent far away, without being able to return.
I do not care about your reputation in this forum, or what you post, if you try to help me, I think the least that I can, is to be considered.
There is this said and written.
Have a nice day.
P.S.
Without obd scanner, you can not know why the car is failing.
Many times for an even quality file, the car is required to be 100% ok, and this is not usually the case of a RHY with 300k KMS.
It is preferable to find the fault, which seems slight, and then create the file correctly.
Regards