CAS2 -> CAS3 copy ISN & VIN

[xdamdamx]

Hello friends!
Cutomer brought to me an E90 with not working remote.
Figured out that CAS2 installed is in it, when it should be CAS3. I have a spare CAS3 and remote key is working, but of course immo problem.
Could you please help me with moving data from one to another?
in attachement read from CAS2 (engine is starting on it) and read from CAS3 (different VIN & ISN)
I've found ISN in CAS2 - 65 52 (B7)
I've found ISN in CAS3 - 93 D6 (69)
VIN should be easy to do with WINKFP - am i right ?
But i'm not sure if it's ok only to change it ?

Thanks in advance for any help.

[CarCity]

Hello friends!
Cutomer brought to me an E90 with not working remote.
Figured out that CAS2 installed is in it, when it should be CAS3. I have a spare CAS3 and remote key is working, but of course immo problem.
Could you please help me with moving data from one to another?
in attachement read from CAS2 (engine is starting on it) and read from CAS3 (different VIN & ISN)
I've found ISN in CAS2 - 65 52 (B7)
I've found ISN in CAS3 - 93 D6 (69)
VIN should be easy to do with WINKFP - am i right ?
But i'm not sure if it's ok only to change it ?

Thanks in advance for any help.

Cas 3 :
VIN: WBAWA72060PG80362
KM: 147007 km
DME Code : 93D640FF
Key cutting code:HA00029488
CAS remote control frequency:868Mhz

ISN: DA623161575CBF5D2AD7E1282F9CE5A1

[xdamdamx]

Thank you friend, but what should i do now ? read DME and copy ISN from DME to CAS3 ?

[kiszka]

..........

[CarCity]

Thank you friend, but what should i do now ? read DME and copy ISN from DME to CAS3 ?

Yes you read DME and extract ISN so write to CAS

[kiszka]

..........

[xdamdamx]

93+D6=169 , i don't know why is it so too...
In attachement read from DME.

[kiszka]

..........

[CarCity]

here should be 69, I do not understand

Yes you right should be 69 !!!

[Sidemark]

it should not be cas3 in this car - cas2 is ok . Dont know why u do such conclusion. I think u do something another that not working key.
another thing - u cannot put keys from your cas2 to your cas3 dump, totally another eeprom !!!!!!! Call me in Poland - i will help u . Tel number in PM

[xdamdamx]

hmm, so the question is : why does the remote working on CAS3.
I have 2 sets of CAS2+KEY , both of them not working. I don't believe that both CAS2 or keys are dead ? in INPA FBD-telegrams are coming... have no idea what...

[Sidemark]

hmm, so the question is : why does the remote working on CAS3.
I have 2 sets of CAS2+KEY , both of them not working. I don't believe that both CAS2 or keys are dead ? in INPA FBD-telegrams are coming... have no idea what...
if working - let it be so . Ok. BUT
another thing - u cannot put keys from your cas2 to your cas3 dump, totally another eeprom !!!!!!! Call me in Poland - i will help u . Tel number in PM

[bearheroes]

if working - let it be so . Ok. BUT
another thing - u cannot put keys from your cas2 to your cas3 dump, totally another eeprom !!!!!!! Call me in Poland - i will help u . Tel number in PM

Why you can’t transfer keys?Eeprom doesn’t matter...just need all special data...


Sent from my iPhone using Tapatalk

[Sidemark]

Why you can’t transfer keys?Eeprom doesn’t matter...just need all special data...


Sent from my iPhone using Tapatalk
because his eeprom from cas3 is EWS4 crypto

[Sidemark]

That topicstarter was receiving help two times : first time didnt help, second time i found eeprom from cas2 and changed ISN, VIN , put keys from old another cas , changed FA and coded new made eeprom on the table and didnt get feedback from him, telephone didnt pick up.
So i offer ignore him next time and think about your time which u spend in zero helping such clowns.

[kiszka]

That topicstarter was receiving help two times : first time didnt help, second time i found eeprom from cas2 and changed ISN, VIN , put keys from old another cas , changed FA and coded new made eeprom on the table and didnt get feedback from him, telephone didnt pick up.
So i offer ignore him next time and think about your time which u spend in zero helping such clowns.
I think you need a vacation,
because your mother did not teach you culture

[CarCity]

I think you need a vacation,
because your mother did not teach you culture

@kiszka

do not enter into a discussion with a person of such level !!!

Your signature !!

[Sidemark]

Hhhmmm. What a strange thing i see from some persons
1. Help for money is bad.
2. Help for free is bad too, but when i came here this persons were talking that it is good help for free.
3. Write own opinion about help for somebody is bad too.
What i noticed - this some persons start hate somebody
, when they see, that somebody has more knowledge in some bmw deal.
After this they are trying to send this person to bann making provocation to this person.
Kiszka, be a man, because u are acting like a children.

P.S. and stop posting your dangerous answers - they can damage somebodys's bmw ))