E60 Cas2 edc16

[Pyromaniak]

Hi friends, i need know , if this files are matched.(paired) and paired ofcourse, if was not :D

Car E60 535d 2005 210kw

Car dont start (cranking but no start)

Cas2 e2p+flash.... EDC16 all files.

Many thanks in advance

[brend]

Sunchro by obd2?

[Pyromaniak]

Sunchro by obd2?

hi brend, i hawe not experience with synchronization, i have only inpa for this cars :)

[brend]

Go in ecu or cas adaptation or servis function and edit cas-dde sunchronisation.Samething like that
Ecu must have fault like .....ews anti tampering protection....

[gif_kuba]

dump is paired - isn is same in cas and dme,
in inpa go to cas and run cas-dme syncro to relearn rolling code

[Pyromaniak]

thanks friends, i try today make it, but nothink hapend. after procedure red warning ligth on inpa i tryed reset too, maybe this is problem :D

[gif_kuba]

post here errors from dde, if is problem with rolling code then must be "ews tampering" , "ews manipulation" or something like this

[kiszka]

Hi friends, i need know , if this files are matched.(paired) and paired ofcourse, if was not :D

Car E60 535d 2005 210kw

Car dont start (cranking but no start)

Cas2 e2p+flash.... EDC16 all files.

Many thanks in advance
isn 5ED6 is ecu and cas
read errors from dde


cas2
VIN: WBANC91080B764065
DME Code: 00005ED6
Odometer: 242474 km
Key Type: E60 old type
Mechanical Code: 1362
Remote Frequency: 868MHz

[xyznia]

never seen bmw 535d 2005 with 210kw engine

[Pyromaniak]

never seen bmw 535d 2005 with 210kw engine

i think its M packet... seriously making 210kw from 2007, but this power have writen in technical list (if is not wrong :) )

thank you guys, morning i try it