Siemens PPD 1.2 VW checksum

[clevlandoz]

Hi

I removed the DPF from a 2.0 Touran but did not manage the add the right checksum.
On a older thread i found the WinOls Plugin "OLS299" but no luck can you point me to the right direction or add the checksum to my modified file?

Much appreciated

[levisdj]

Go ahead ... ! checksum ok!

[clevlandoz]

Wow!
You are a legend ! Thank you so much

[clevlandoz]

Again thanks for your speedy response.

I uploaded the file with my KESS and the car will no longer enter the "Emergency mode".

But i still get the message on the Screen "DPF read manual" and the yellow light on the dash stays on from the moment i turn the key ON.

I forced the regeneration with my diagnose tool and drove around town still no change.
The Pressure on the DPF on idle is around 2...4 mBar on load up too mBar 400
The Temperature before the DPF never goes above 400 Deg C

Any Ideas?