PIN for Peugeot 307 from VIN - BSI eeprom erase!

[klakol]

Hello!

I have Peugeot 307 with damaged eeprom in BSI. ECU unit is MM IAW 6LP1, and i can't read it for calculate PIN! Someone can help?

VIN: VF33HRFNF82709405

[electrones]

Hi friend
U can read your ECU ST10F280 to get pincode, read and post here someone or me will help u


Cheers

[unobayu]

use xprog or cheap mpps v16 to read ST10280 flash memory. you will find PIN without calculator. just use hex editor or anything that can view bin file

[klakol]

I read it SMOK J-TAG ;-)

Can you calculate PIN?

I try 12TT, but PP2000 say it is wrong PIN ;-(

[unobayu]

Try 21TT
btw, what is your case? bsi eeprom damage? so you replace with new eeprom?

if you input PIN in new/blank bsi, it never say wrong PIN, because you just input new PIN in BSI. but if pin do not match between ECU and bsi, engine no start.

if you confuse, just virgin ECU, virgin BSI. First programing bsi with PP2000, input whatever PIN you like
then program ECU, input PIN SAME as BSI. now engine start and you have your own created PIN

[Zmann]

input whatever PIN you like

You must recommend too that he require a new key, otherwise that will be failed. Use old pin !

[unobayu]

oh yes i forgot to mention need virgin transponder id46. thanks for correction

[klakol]

I dont do it first time, earlier when i virginise BSI and writing OLD pin key with old transponder working properly ( remote too ), but this Peugeot 307 is not diesel ( edc16 ), and maybe PIN is incorrect check between BSI and ECU software - maybe flash damage, or virgin file incorrect for this version ?

My original flash, and eeprom attached

[unobayu]

i will try look at your dump. but slow respond because now i'm on the trip without Notebook. i'll try look using my phone

[kiszka]

..........

[unobayu]

looks like your file is bsi blank. i will give virgin dump bsi HC912 thats work for me.. later when i'm home

[kiszka]

..........

[klakol]

kiszka, can you help me? I dont know what i'm doing wrong. I have correct PIN, but when i enter PIN PP2000 give me information was pin incorrect ;-(