bmw e90 dash problem

[LEORNARD NKATA]

hie guys
i was working on a bmw320 e90 dash and now its now displaying 999999 can anyone help me solve this i have attached both dash and cas dump

[brend]

Press thanks+rep.
Dash. 37040km.
If looked new type cas its 5988708 km.
If looked old type its 0km.
But i think your cas new type.Try.
Im edit cas (new type) by 0km.

[Sidemark]

reasons of this 999999:
- first pin of eeprom is not in its place
- bad soldering
2eeproms are OK

[brend]

reasons of this 999999:
- first pin of eeprom is not in its place
- bad soldering
2eeproms are OK

If bad solde or samethink like that ,dash just not work like not power up.
Him dash work and its just displaying wrong km its mean dash or cas have wrong calckulating algoritm because displayed 999999.

[kubuswujo]

have you writen flash?
What tool are you using? r270+?
I got same problem after changing the milage, and i have written the clear FLASH on the CAS2 and oryginal dump with KM.
Then have eddited it to 0KM and eddited KM in Dash to KM needed, after this everything was working good.

Probably you have also damged flash?

[Sidemark]

Probably you have also damged flash?
Explain please what attitude flash has to mileage ? Better say nothing then read this HA-HA

[brend]

have you writen flash?
What tool are you using? r270+?
I got same problem after changing the milage, and i have written the clear FLASH on the CAS2 and oryginal dump with KM.
Then have eddited it to 0KM and eddited KM in Dash to KM needed, after this everything was working good.

Probably you have also damged flash?

If bad flash its mean cas not work .

[brend]

Explain please what attitude flash has to mileage ? Better say nothing then read this HA-HA

Mate your first post look like same ,so no need criticks another people.Take easy and enjoy life and respect all dk people.

[kubuswujo]

I have tried once to read flash and eeprom in CAS2 using r270+ as I suppose the soldering was bad, after reading both and then editing EEprom to 0km.
The car shows milage like 656 565km (sth big) on dash (oryginalny it was 330 000km).
Then I write resolder it, have written Flash and once more eeprom 0km and was working.

I want only to help on that what i had before.

[Sidemark]

If bad flash its mean cas not work .
I mean that if u do mileage - u dont need flash at all. Thats what im talking about . Take it easy