golf 6 med 17.5.5 nead software without automatic transmision

[rtvservis]

car orginal with automatick transmision demage .
instal manuale transmision
tray to code ecu to manuale transmision . it not posible . nead change software to alredy coded to manual transimision

hellp pleas

1037503603
0261s04391
03C906016A
MED17.5.5 G
RB8-65825.01.09L3H04

FILE READED FGTEC CAN OBD . I CAN READED FULL BDM IF NEADED.

[rtvservis]

i neda good immo off withaut show on dash

ecu is with tc1766
hw sw 1037502867
readed fgtec4 but pin
NO MOR EROR ON ABS AND ECU * COMUNICATION WITH AUTOMATIC TRANSMISION *


HELLP PLEAS
IMO ON THIS FORUM
http://www.digital-kaos.co.uk/forums/showthread.php/639897-golf-6-med-17-5-5-nead-IMMO-OFF-AND-CHECSUM

[voltechcar]

becuase you damage this car not repair? use frf file and flash this ecu to software, than new coding and works. You need immo off for what?

[rtvservis]

orginal ecu working i tray to code option withaoot automatic transmision didn menage .

[rob h]

Upload ecu data from original. flash and eeprom.
Then we can adapt the immo data.

And if you make a ecu virgin, you can adapted the immo, and write the longcode 1 time.

[voltechcar]

for what???? he need only chenge flash, thats all.... use frf

[rtvservis]

orginal file from car ecu

[rob h]

500260

Here you go!
Write eeprom only in the replacement ecu.

[rtvservis]

rob it whell car start with both ECUs.

[rtvservis]

rob car working no ereor thenx .

[ancutesculiviu]

Hello there is any posibility to update the SW on the ECU i heraed that ODIS-E can do something like that but i„m scared of it

[ancutesculiviu]

03C906016AJ_9970.sgo i want to flash i have currently 03C906016AJ_5718 SW can i do a sw update without braking the immo?