MB Sprinter 906 ecu personalization problem

[gif_kuba]

Hi,
i have on my workshop MB Sprinter W906.113 from 2008 year with original 2.2cdi and ecu EDC16CP31 CR4.20
we put engine 2.7cdi from W211 2003 year with ecu EDC16C2 CR3.12
i virginised edc16c2 and try to do personalization with stardiagnose but i get error
in ezs i see comunication with engine ecu

anyone can help ?

[daxxer]

Hi,
i have on my workshop MB Sprinter W906.113 from 2008 year with original 2.2cdi and ecu EDC16CP31 CR4.20
we put engine 2.7cdi from W211 2003 year with ecu EDC16C2 CR3.12
i virginised edc16c2 and try to do personalization with stardiagnose but i get error
in ezs i see comunication with engine ecu

anyone can help ?

oh god :D:D:D

crazy idea but maybe good at end.... ;)

you can personalise ecu from W211 only to EZS from W211, sure not to W906 EZS :listen:

[gif_kuba]

some people make this on 906 ezs I think exist trick

[brend]

some people make this on 906 ezs I think exist trick

Find this people and ask how.
I think with w906 ecu its possable not with ecu w211.
How another like ABS,Dash?

Or w211 component put in w906 like abs,ezs,dash.

[gif_kuba]

its secret knowledge...
nobody want talk
or

don't make this - only talk...

[brend]

its secret knowledge...
nobody want talk
or

don't make this - only talk...

Because if you know what is ezs and can comunication you never put this w211 in w906.

[gif_kuba]

but in ezs live data i see can communication with engine ecu is ok - so can bus speed is same and modules talk together,
maybe is like in vag cars- other power class or something like this

[daxxer]

but in ezs live data i see can communication with engine ecu is ok - so can bus speed is same and modules talk together,
maybe is like in vag cars- other power class or something like this

W211 ecu are in status when allowed personalisation to W211 EZS only...not to others...no any W906 :listen: still not understand ?
W211 have separate CGW, W906 have EZS+CGW in the same unit...and there many more others differences... :listen:
don't await simple help through few words and finish success.... :listen:

[icogsm]

you need -change -software by w906 -edc16 c2
b.r.

[icogsm]

this SW is for w906 2.7cdi cr3.12!
test and report pls

b.r.

[gif_kuba]

ok, I try and give feedback

[gif_kuba]

this SW is for w906 2.7cdi cr3.12!
test and report pls

b.r.

tested your software, but same trouble
maybe I can't personalize bcos I try on bench and in ecu I have lot of errors ?

[icogsm]

.........test by obd to CAR.................

[icogsm]

check AVDI DAS manager user manual !!
b.r.

[brend]

....................:lollypop:

[ilian_cho]

Find someone with avdi. Read fsb data on table from original ecu and transfer to new. Try.

[brend]

..............:lollypop:

[seattm2012]

Hi,
i have on my workshop MB Sprinter W906.113 from 2008 year with original 2.2cdi and ecu EDC16CP31 CR4.20
we put engine 2.7cdi from W211 2003 year with ecu EDC16C2 CR3.12
i virginised edc16c2 and try to do personalization with stardiagnose but i get error
in ezs i see comunication with engine ecu

anyone can help ?

Hello how solved problem? Because i have problem too. But my ecu from w210 2.7cdi EDC15C CR2

[seattm2012]

Hi,
i have on my workshop MB Sprinter W906.113 from 2008 year with original 2.2cdi and ecu EDC16CP31 CR4.20
we put engine 2.7cdi from W211 2003 year with ecu EDC16C2 CR3.12
i virginised edc16c2 and try to do personalization with stardiagnose but i get error
in ezs i see comunication with engine ecu

anyone can help ?

I think need connect two ecu in CAN network. And calibrate CAN protocol. Have master and slave ecu. But how? Anythink know?

[ekas]

You need cr2 emulator, or connect key + ezs + esl from w210

[seattm2012]

You need cr2 emulator, or connect key + ezs + esl from w210

thanks, i problem solved. now work with orginal key + ezs + esl.
when connect key + ezs + esl from w210 mising esp dash no km -------.

[schouten1977]

meaby find sync bytes from ecu and ezs and do it manually i thit with w210 and it works

[schouten1977]

meaby find sync bytes from ecu and ezs and do it manually i thit with w210 and it works ore immo off

[SHPETIM]

MB Sprinter W906.113 from 2008 year with original 2.2cdi and ecu EDC16CP31 CR4.20
we put engine 2.7cdi from W211 2003 year with ecu EDC16C2 virginised edc16c2 and try to do personalization with stardiagnose but i get error
in ezs i see comunication with engine ecu

anyone help thanks