PDA

View Full Version : Hyundai i30 edc17c08 torque monitoring fault



shooperis
16th January, 2018, 02:08 PM
Hello,
could someone deactivate torque monitoring for this ecu? i tuned this car and rune great, but with 3 gear about 2000rpm with pressed ~30% throttle i get P12BF. I found 0x12020F - SVTQL (maximum deviation of difference between level1 and level2 for plausibilisation) (MoFCoEng_rTrqMaxDiffAdap_C) changed 8bit from 128 to 255 and no success. So would be wonderful if somebody helped.

shooperis
16th January, 2018, 05:11 PM
anybody cant help?

NASTASE
16th January, 2018, 05:30 PM
Hello,
could someone deactivate torque monitoring for this ecu? i tuned this car and rune great, but with 3 gear about 2000rpm with pressed ~30% throttle i get P12BF. I found 0x12020F - SVTQL (maximum deviation of difference between level1 and level2 for plausibilisation) (MoFCoEng_rTrqMaxDiffAdap_C) changed 8bit from 128 to 255 and no success. So would be wonderful if somebody helped.
Can help by your self , if you made a good tuned file.Of course you have something wrong in your mod file,or you've missed something.

shooperis
16th January, 2018, 05:45 PM
But there is a possibility to deactivate torque monitoring in this ecu?

maajkii
16th January, 2018, 05:49 PM
it is...........

voltechcar
16th January, 2018, 06:33 PM
dont touch conversion fuel to nm, change only limiters nm and you dont have this problem

shooperis
16th January, 2018, 07:09 PM
I dont touched Nm to IQ conversion.

Andrei2015
16th January, 2018, 09:17 PM
try this. pass in pm

icezero2010
16th January, 2018, 09:31 PM
I dont touched Nm to IQ conversion.

check the csv set the rpm to 5000rpm from level 1

"$122416";"Maximum of inner engine torque from ECU monitoring package.";"1x1"
"$13A908";"Enginespeed threshold over there is an level 1 limitation by continous torque monitoring possible";"1x1"
"$13A92E";"Map for level 1torque limitation offset (n-synchronous calculation)";"8x8"

mario38
17th January, 2018, 09:10 AM
Hello,
could someone deactivate torque monitoring for this ecu? i tuned this car and rune great, but with 3 gear about 2000rpm with pressed ~30% throttle i get P12BF. I found 0x12020F - SVTQL (maximum deviation of difference between level1 and level2 for plausibilisation) (MoFCoEng_rTrqMaxDiffAdap_C) changed 8bit from 128 to 255 and no success. So would be wonderful if somebody helped.


I found this solution to your problem

shooperis
17th January, 2018, 10:41 AM
Problem solved yesterday, but thanks to all for helping.

massimo74
17th February, 2018, 06:18 PM
Problem solved yesterday, but thanks to all for helping.

when you solve ??? identical problem hyundai ix35 1.7 crdi edc17c08