PDA

View Full Version : Touareg 3.0 TDI DPF regeneration



jesusoli
19th January, 2018, 07:21 PM
Hi. I need help with a Touareg 3.0 TDI, BKS engine.

I can not do the forced regeneration of the DPF particle filter.

Temperature with goes from 200 degrees Celsius.

The differential pressure sensor has been changed and the temperature sensor before the dpf filter.

500137

The MVB 102.1 is always at 899 degrees centigrade.

Help, help

chli1976
20th January, 2018, 01:01 PM
Look at MWB 101/3, you don`t reached the temperature for regeneration.

102/1 is temperature after pre-catalyst until 11.2005
102/1 is temperature prior pre-catalyst after 11.2005 and then it is a calculated value

Look here for instructions http://wiki.ross-tech.com/wiki/index.php/3.0l_V6_TDI_(BKS/BMK/BUN)#Particle_Filter_Emergency_Regeneration

jesusoli
22nd January, 2018, 10:48 AM
So, how can I see if the turbo temperature sensor (102/1 is temperature prior to pre-catalyst after 11.2005 and then it is a calculated value) is OK?
The reference is 059906088A.
Someone has the ELSA Win to see the values in ohms?.

chli1976
22nd January, 2018, 11:53 AM
In elsa there are no data for Ohm, you must see in odis

What build year is your car ?

jesusoli
22nd January, 2018, 07:34 PM
3.0 TDI BKS 2007

The sensor has 205 ohms with the engine cold. I think it's okay.
The problem is that I can not raise the DPF temperature, it will not be the EGR valve?

Pyromaniak
23rd January, 2018, 11:04 PM
i think dpf its off in ecu, if the temperature are same for all time

jesusoli
25th January, 2018, 03:25 PM
How does the EGR work when it is in regenraracion?
Open or closed the EGR cooler?
Open or closed the EGR?

chli1976
25th January, 2018, 05:14 PM
EGR is closed in regeneration

Picture is from 4 cyl

epicsabi
3rd June, 2019, 04:26 PM
I have same problem with Tuareg 3.0 TDI BKS engine.

The MVB 102.1 is 899 C degrees

What was the solution for this problem?