can any one get my dead phone back to life

[evelyn2008]

tryed to de brand my phone today ( samsung pixon)now its dead it wont even power up is there any possible way to make it work again my wife has just kicked my head in and says i have to buy her a new one . just thought i would ask you guys first if there is a solution PLEASE HELP

[djollie]

4shared.com - online file sharing and storage - download M8800XEIE1.rar (http://www.4shared.com/file/110295993/3f2856f9/M8800XEIE1.html)

4shared.com - online file sharing and storage - download M8800XFIB2.rar (http://www.4shared.com/file/104556251/8363c1e2/M8800XFIB2.html)

try these firmwares

[evelyn2008]

JUST TO LET YOU KNOW THAT IT WAS NOT YOUR WAY OF DOING IT THAT YOU POSTED ME YESTERDAY. I LET A MATE DO IT HIS WAY. WHHAT A BIG MISTAKE THAT WAS. I WISH I HAD JUST USED YOURS . I WILL HAVE AGO AT THESE TWO FIRMWARE BUT I DONT THINK IT WORK BECAUSE THE PHONE WILL NOT RESPOND WHEN I PLUG IT IN THE COMPUTER BY USB . WILL HAVE AGO ANYWAY THANKS

[djollie]

JUST TO LET YOU KNOW THAT IT WAS NOT YOUR WAY OF DOING IT THAT YOU POSTED ME YESTERDAY. I LET A MATE DO IT HIS WAY. WHHAT A BIG MISTAKE THAT WAS. I WISH I HAD JUST USED YOURS . I WILL HAVE AGO AT THESE TWO FIRMWARE BUT I DONT THINK IT WORK BECAUSE THE PHONE WILL NOT RESPOND WHEN I PLUG IT IN THE COMPUTER BY USB . WILL HAVE AGO ANYWAY THANKS


4. While holding the no. 9 button on the phones key pad, tap the power button, the phone screen will come on black with a red stripe that says "Download" ( For Tocco and Pixon users : Hold down the "Volume -" button on the left side, and the "Camera" button on the right, then press the "Power" button = all three buttons need to be pressed together. Your phone should start up into a red\blue on black bootloader screen.)

[evelyn2008]

no it does not respond at all but i feel i should;nt give up to easy . this is what we got told to do to de brand it see what you think , have a look at it it is different to yours what you sent to me yesterday
.ExternalClass .EC_hmmessage P{padding:0px;}.ExternalClass body.EC_hmmessage{font-size:10pt;font-family:Verdana;}

.ExternalClass .EC_hmmessage P{padding:0px;}.ExternalClass body.EC_hmmessage{font-size:10pt;font-family:Verdana;}.ExternalClass .EC_hmmessage P{padding:0px;}.ExternalClass body.EC_hmmessage{font-size:10pt;font-family:Verdana;}Right first things first, you will need:

1: A nice Samsung M8800
2: The USB data link cable that comes with the phone
3: The CD thats comes with the phone (for the USB drivers)
4: A windows computer.
5: M8800 firmware http://www.mediafire.com/?ttg0mybtzie (http://www.mediafire.com/?ttg0mybtzie)[/URL]
6: multi loader v5.50 http://www.4shared.com/file/108661971/26431632/MultiLoader_V556.html (http://www.4shared.com/file/110295993/3f2856f9/M8800XEIE1.html)
7: You need winrar in your pc if you do not have one already [U]http://download.cnet.com/WinRAR/3000-2250_4-10007677.html (http://rapidshare.com/files/219565489/MultiLoader_V5.50.rar)

Save both file in desktop for easy reach.
Please read all the instruction before doing anything.

THE GUIDE:

1: Install the USB drivers from the CD(if you havn't done it already)

2: Extract the firmware and multiloader v5.50

3: Remove the memory card and simcard from your phone.

4: While holding the botom volume key sametime press camera and on/off button(make sure you phone is off before doing this)

5: Your phone will light up and it will come up in download mode , now run the multiloader v5.50 which is look like this(http://bbsimg.pcpop.com/UpLoadImages/2009/1/11/0x0/991e2920-a77f-417a-8f9e-baed00b9e20e.jpg (http://bbsimg.pcpop.com/UpLoadImages/2009/1/11/0x0/991e2920-a77f-417a-8f9e-baed00b9e20e.jpg)
now connect your phone to pc with usb cable

6: Select the second option button (The one that says ?MSM6275/MSM6280 etc...?)

7: Tick FULL DOWNLOAD
7a: click the Boot button and select the bootfiles which are inside the folder containing the flash files.
7b: click Amss and select the amss from Binary folder which are inside the folder containing the flash files.
7c: click Rsrc1 and select the rsrc1 from Binary folder which are inside the folder containing the flash files.
7d: click Rsrc2 and select the rsrc2.mid from Binary folder which are inside the folder containing the flash files.
7e: click factory FS select the fatory fs from Binary folder which are inside the folder containing the flash files.

8: Click the Port Search button so that the connected COM port is shown as Ready (Bresson).

9: Click the download button.

IF YOU FIND COM ERROR MESSAGE JUST PRESS THE PORT SEARCH BUTTON AGAIN AND THAN PRESS DOWNLOAD

OK, nearly there. At this point it will look like your phone is trashed, do not worry young children, all will be revealed.....
JUST WAIT AND SEE UNTIL YOUR PHONE TURNS OFF ITSELF AND BACK TO LIFE
ANY PROBLEM PLEASE DON'T GUESS JUST SEND ME AN EMAIL.

PLEASE DON'T FORGET TO LEAVE ME A FEEDBACK

Thanks

[Thekid]

i try to do what you say but it would keep saying error and nothing else would come up. please i need help.