Ford EDC16C34 glow monitoring and egr off

[mislav88]

I have Ford Fusion with EDC16C34 ecu, need to disable glow plug monitoring and egr. Thank you

[sonic 1989]

hi, test and report glow plug

[mislav88]

thank you but i still have P1395, P138b and car in limp mode, wont rev over 3000rpm

[sonic 1989]

test glow plug control





injector registered ????????????????????

[kospoz]

have you checked glow plugs?i had same situation with cmax and i fixed it with 4 new glow plugs

[mislav88]

problem is not with glow plugs but glow plug system, wiring is from a car with only glow plug relay, ecu expects to find glow control module which isnt present

[mislav88]

injector coding is ok, cheched with ids. when i erase faults after i turn ignition on and then start engine, i can drive normally without limp and mil until engine is shut down again and restarted.

[sonic 1989]

my versions 2 did not help ????


http://www.digital-kaos.co.uk/forums/images/styles/DarkCore/attach/rar.gif egr glow- 1037374715.rar (http://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=500443&d=1516529482) (371.0 KB, 1 views)

[mislav88]

no, i managed to get rid of P138b with switch at 1CB1D4 but still limp mode with P1395

egr is ok with your file

[cawadany]

You have to switch off the glow plug system. Removing dtc only is not the solution. No dtc but limp mode

[johak]

hi
try with this file

[voltechcar]

switch off glow plug not work.............. if they file not work write to me, I do to any problem.....

[mislav88]

thank you guys i managed to get rid of glow plug problem with a file from another car, now i believe egr is my problem, i have dtcs and limp mode

P1412 EGR valve frozen
P1635 tire\axle out of acceptable range

[sonic 1989]

hi,your egr off+ maps dtc code obd and class

[mislav88]

with your file no dtcs but still limp mode and MIL flashing on dash

[johak]

............................