PDA

View Full Version : mazda 3 2010 odometer change needed


erdilmen
20th January, 2018, 03:52 PM
2010 mazda 3 93c66 8 bit read attached
old value is 94852 i need it 30k
brend
20th January, 2018, 04:09 PM
No vin location.
Bad damp.Desolder and read 16bit.
erdilmen
20th January, 2018, 04:19 PM
No vin location.
Bad damp.Desolder and read 16bit.
here is 16 bit
brend
20th January, 2018, 04:22 PM
Press thanks+rep.
rafal
20th January, 2018, 04:22 PM
here you go
Dr. Zoidberg
20th January, 2018, 04:34 PM
here you go
30199--------
erdilmen
20th January, 2018, 04:59 PM
Press thanks+rep.
its not working , no odometer , car is not started. With original eprom no problem.
File is not ok
brend
20th January, 2018, 05:08 PM
.................
erdilmen
20th January, 2018, 05:11 PM
.................
check this dump i read them with elnec
brend
20th January, 2018, 05:14 PM
its good same like read 2.rar .Write this good 30000 post 8.
erdilmen
20th January, 2018, 05:20 PM
its good same like read 2.rar .Write this good 30000 post 8.
odometer is ok car is not starting
brend
20th January, 2018, 05:54 PM
disconect battery 5 min.
erdilmen
20th January, 2018, 06:16 PM
disconect battery 5 min.İts not working too

SM-N950F cihazımdan Tapatalk kullanılarak gönderildi
brend
20th January, 2018, 06:22 PM
ok try this it most work.
erdilmen
20th January, 2018, 09:39 PM
ok try this it most work.Still not working


SM-N950F cihazımdan Tapatalk kullanılarak gönderildi
Dr. Zoidberg
20th January, 2018, 09:42 PM
Still not working


SM-N950F cihazımdan Tapatalk kullanılarak gönderildi

you probably need to synchronize board and ecu ...
erdilmen
20th January, 2018, 10:26 PM
you probably need to synchronize board and ecu ...İ add New key with sbb

SM-N950F cihazımdan Tapatalk kullanılarak gönderildi
antibisic
21st January, 2018, 10:19 AM
İ add New key with sbb

SM-N950F cihazımdan Tapatalk kullanılarak gönderildi


With original not start too?
Dejfat
21st January, 2018, 04:48 PM
Does your original file start?