SUBARU XV2012 stop working

[wd bau]

Hello
i am helping my friend he got this car after another one locksmith tried to add key to it and the car stops working (even customer original key ) ,its a 2012 SUBARU XV.
I tried every tool I have G scan ,T code and so on I did even add anther G chip to it by tango memory 24c02 in the BCM but the car is the same.
the key is programed in the BCM but the immo light will go off and back on again .
I did not find any solution after looking in the net every where , the BCM and ECU they lost synchronization ,evry one says U have to send the car to SUBARU dealer and we don,t have one hear.
P1571 is in the ECU
ANY ONE CAN HELP
THAN,K U

[nickolasd]

is far is i know bcm(BIU) gets synchronized with cluster. looks like dump was damaged. find another used bcm add key via dump and sync with cluster via dump, I'm sure somebody can help with that here.
or find dump out of the same bcm part number do key and sync.
i have one dump out of 13 XV may be it will work for you. post your part number.

when you send car to subaru dealer they remove bcm and cluster and send it somewhere to reset to a brand new state.

[eliaselias]

Hello
i am helping my friend he got this car after another one locksmith tried to add key to it and the car stops working (even customer original key ) ,its a 2012 SUBARU XV.
I tried every tool I have G scan ,T code and so on I did even add anther G chip to it by tango memory 24c02 in the BCM but the car is the same.
the key is programed in the BCM but the immo light will go off and back on again .
I did not find any solution after looking in the net every where , the BCM and ECU they lost synchronization ,evry one says U have to send the car to SUBARU dealer and we don,t have one hear.
P1571 is in the ECU
ANY ONE CAN HELP
THAN,K U


hello post dump for bcm
i will solve your problem

[wd bau]

thanks a lot ,ok i will read them and post here

[wd bau]

hello post dump for bcm .... and dump for ecu...
i will solve your problem

here ECU and BCM dump

[wd bau]

is far is i know bcm(BIU) gets synchronized with cluster. looks like dump was damaged. find another used bcm add key via dump and sync with cluster via dump, I'm sure somebody can help with that here.
or find dump out of the same bcm part number do key and sync.
i have one dump out of 13 XV may be it will work for you. post your part number.

when you send car to subaru dealer they remove bcm and cluster and send it somewhere to reset to a brand new state.

here BCM #88281FJ200 with Eprom 24c02

[eliaselias]

just write this new file and your car will be started with all key

[wd bau]

(http://www.digital-kaos.co.uk/forums/member.php/446218-eliaselias)thanks elias for help car start .

[pimpin]

hi elias l have same problem on subaru 2013 impreza can you help me please thanks in advance l have AutoProPad original and no work thanks in advance

[eliaselias]

hi elias l have same problem on subaru 2013 impreza can you help me please thanks in advance l have AutoProPad original and no work thanks in advance

Read and post your dump

[skemotor]

Hello im am having similar issues with a 2012 subaru impreza Japanese market car came to me after the guy removed cluster for non-working fuel gauge. Would not start after it seems someone not knowing tried to reprogram keys with some unknown to me key programmer, I am getting p1571 in ECU, Whenever i try to do immobilizer registration it fails. Please advise me how to read Dumps i have a TL866a Programmer and Clone SSMiii.
Thanks For any Help in Advance

[eliaselias]

Hello im am having similar issues with a 2012 subaru impreza Japanese market car came to me after the guy removed cluster for non-working fuel gauge. Would not start after it seems someone not knowing tried to reprogram keys with some unknown to me key programmer, I am getting p1571 in ECU, Whenever i try to do immobilizer registration it fails. Please advise me how to read Dumps i have a TL866a Programmer and Clone SSMiii.
Thanks For any Help in Advance

read bcm data and send it here

[skemotor]

remove bcm located in driver side...up the pedal break and read for me eeprom 24c02
here is the picture of the eeprom location... sometime the eeprom is micro small...i suggest you to read it outside circuit
504765.....

then remove ecu from passenger side... and find inside it 93c56 or 93c86... read eeprom and send me the data...
504769

do you still have old dashboard if yes let me know.... ( dont need to read eeprom of dashboard)

Here are files

[eliaselias]

Here are files

here is your file that will make your car start

[skemotor]

Thank you Elias car Starts your a genius

[Justsuper]

Help
I have Legacy with new Engine computer, all other components are original.
Engine ECU was stolen so customer bought brand new ecu. Car not starting.

[eliaselias]

Help
I have Legacy with new Engine computer, all other components are original.
Engine ECU was stolen so customer bought brand new ecu. Car not starting.
what is your car model
and eeprom type in engine ecu and bcm ...
your key is smart or normal ?

[Justsuper]

2009 Legacy
Engine 93C56
BCM 93C56
Smart Key system 93C86

[action warren]

Hi Elias here are my BIU and ECU readings as discused...

Many thanks...

[action warren]

Hi Elias sorry forgot to give you the ECU dump c56 the other files were the BIU 24C02 reading...

Here is the ECU reading...

[eliaselias]

Hi Elias here are my BIU and ECU readings as discused...

Many thanks...

here is your file with tested solution

[Justsuper]

Hey Eliaselias are you able to help me with the 2009 Legacy i posted the dumps here already.

[bobby maze]

hello elias
i fallow a bit of how you helped others and was wondering if you can help me as well
i have 2 subaru impreza 2012 im working on and i think its the same as the others here code P1571 is also coming ON on both
i atteched both BIU and ECM x2 dumps

if you can help me that would mean a lot
thanks in advance

[richar]

maestro por favor ayuda
herencia, DTC: P1571. llave de proximidad , año 2007 , japon,.
bcm 24c01
ecu 93c66 HITACHI

[eliaselias]

hello elias
i fallow a bit of how you helped others and was wondering if you can help me as well
i have 2 subaru impreza 2012 im working on and i think its the same as the others here code P1571 is also coming ON on both
i atteched both BIU and ECM x2 dumps

if you can help me that would mean a lot
thanks in advance

here is your file that will make your car back to life again

[bobby maze]

elias you are number 1 my friend it worked thanks again for helping it means a lot

[locky390]

Hi Elias subaru impreza 2009 .smart ecu 93c86 88801fg000 and bcm 24c01 88281fg740 . The bcms been wiped ,hit write instead of read ,can you make a new dump for bcm off remaining dumps is it better to start again with a virgin dump ?If so could I have a virgin dump?
Thanks

[action warren]

here is your file with tested solutionElias u r a genius your solution worked 100 %

Sent from my MI MAX using Tapatalk

[Tomultimate]

Hey Elias,

Im having difficulites with engine computer and BIU link for 2012 G key system. Any chance you can have a look at these file and work your magic? Body contol accepts keys in and out, but the linkage of engine ecu doest seem to work. Comes up with p1571. No other fault codes. i have attached files from BIU and engine ECU. 24c02 and 95c56. Best Regards - Tom

Engine ECU 22765AE720
Body control 88281FJ420

Key in the ignition, turn to start. G key Sysytem

[eliaselias]

Hey Elias,

Im having difficulites with engine computer and BIU link for 2012 G key system. Any chance you can have a look at these file and work your magic? Body contol accepts keys in and out, but the linkage of engine ecu doest seem to work. Comes up with p1571. No other fault codes. i have attached files from BIU and engine ECU. 24c02 and 95c56. Best Regards - Tom

Engine ECU 22765AE720
Body control 88281FJ420

Key in the ignition, turn to start. G key Sysytem

what you was trying to do with the car>>>???? add a key? or all key lost???

in all case that is my magic file that will turn on your car

[Tomultimate]

Hey Elias. that worked perfect.
Thankyou so much for your help

[eliaselias]

Hey Elias. that worked perfect.
Thankyou so much for your help

you are wlecome my friend

[Hugh91]

you are wlecome my friend

Hi mate,

I also am facing this problem after another locksmith has tried to add a spare key to 2012 XV and corrupted link between BIU-ECM. I am able to add additional G chip keys to BIU but fault code in ECM is P1571 and immo light solid. Are you able to help me to repair the fault, with dump from BIU/ECM?

I tried also with AVDI to do function 'Engine ECU Registration' for 60 minutes without success.

[eliaselias]

Hi mate,

I also am facing this problem after another locksmith has tried to add a spare key to 2012 XV and corrupted link between BIU-ECM. I am able to add additional G chip keys to BIU but fault code in ECM is P1571 and immo light solid. Are you able to help me to repair the fault, with dump from BIU/ECM?

I tried also with AVDI to do function 'Engine ECU Registration' for 60 minutes without success.


hello mate... i am ready to fix your car with 100% testable solution

[Hugh91]

hello mate... i am ready to fix your car with 100% testable solution

I really appreciate it, I have no other solution I can provide for this vehicle.

I am awaiting customer to call back because of other locksmith incorrect coding the customer may go to dealership and try with his insurance, but if not they will call me back to attempt repair. Do I need to read and upload dumps from both BIU & ECM?

Thanks

[eliaselias]

I really appreciate it, I have no other solution I can provide for this vehicle.

I am awaiting customer to call back because of other locksmith incorrect coding the customer may go to dealership and try with his insurance, but if not they will call me back to attempt repair. Do I need to read and upload dumps from both BIU & ECM?

Thanks

dealer will not be able to reprogram it... they need to change biu and ecu and to sell you 2 keys ( this operation is very expensive... )
some times also dashboard get corrupted if they attemp many time to reprogram the car by reset-ing the system....
in all case i have the solution without changing any part... for more info you can contact me as message

[flc216]

can you help with impreza 2013 try to program keys sk900536015 tks

[eliaselias]

can you help with impreza 2013 try to program keys sk900536015 tks

here is your file fixed
for more info check your pm

[sadarmeng]

hello master
I am very interested in subaru, though never met such beauty, can you give me a link or guidance book about the key system or smart system diagram used, so before asking for help, we have basic knowledge about subaru. Thank you master.

[kot604]

Hi mate,

Has tried to add a spare key to 2014 XV and corrupted link between BIU-ECM. Fault code in ECM is P1571 and immo light solid. Are you able to help me to repair the fault, with dump from BIU/ECM?
Thanks.

[eliaselias]

Hi mate,

Has tried to add a spare key to 2014 XV and corrupted link between BIU-ECM. Fault code in ECM is P1571 and immo light solid. Are you able to help me to repair the fault, with dump from BIU/ECM?
Thanks.

hello how are you
of course i can make your car start again
you winrar file is empty from inside for more info check your pm

[eliaselias]

Hi mate,

Has tried to add a spare key to 2014 XV and corrupted link between BIU-ECM. Fault code in ECM is P1571 and immo light solid. Are you able to help me to repair the fault, with dump from BIU/ECM?
Thanks.


here is your magic file ....

[locksmithmtl]

I have the same issue I tried programming imprezza 2012 it wouldn’t start , I then tried to do all keys lost and car wouldn’t start either it recognized the keys registeredto the car but wouldn’t start and security light goes on after 3-4 seconds of key in the ignition .. do you know what I should do

[eliaselias]

I have the same issue I tried programming imprezza 2012 it wouldn’t start , I then tried to do all keys lost and car wouldn’t start either it recognized the keys registeredto the car but wouldn’t start and security light goes on after 3-4 seconds of key in the ignition .. do you know what I should do

You problem can be fixed very easly. Just read dumps and post them here

[kot604]

Thanks Elias, everything works perfectly.

[inlock]

Hi eliaselias

Could you please help me. I have customer with 2013 Subaru Impreza. Displaying fault P1571 (Reference Code Incompatibility)

ECU reset was successful but immo light comes after 5 seconds and stays solid.

If you could help I would really appreciate it.

Attached is BIU & ECM dump. Thank you

[eliaselias]

Hi eliaselias

Could you please help me. I have customer with 2013 Subaru Impreza. Displaying fault P1571 (Reference Code Incompatibility)

ECU reset was successful but immo light comes after 5 seconds and stays solid.

If you could help I would really appreciate it.

Attached is BIU & ECM dump. Thank you

here is your magic file that will make your car start again

[fazul001]

hello friend do u know how to get pin for subaru keyless

[vanos batam]

hello friend do u know how to get pin for subaru keyless

post the dump

[Piter2004]

hello
I have Subaru impreza with problem P1571. Could help me?


There is how repaired this problem. Don't forget geive me reputation. No password required
:dancing2::dancing2::dancing2::dancing2::dancing2:

Thanks

[lock66]

Hi eliaselias

Can you help me.
Me Subaru Impreza 2012 with code P1571.
Thanks

[eliaselias]

Hi eliaselias

Can you help me.
Me Subaru Impreza 2012 with code P1571.
Thanks

hello lock66 how are you
this is your file that will make you car back again to life
enjoy it :)

[eliaselias]

hello
I have Subaru impreza with problem P1571. Could help me?

Thanks


hello sorry for the late reply i did not notice that you make a post here
anyway this is your file in case you still need it

[mikkhh]

URGENT help needed, please fix my set :chuncky:.

[eliaselias]

URGENT help needed, please fix my set :chuncky:.
here is your magic file that will make your car run again


good luck

[mikkhh]

here is your magic file that will make your car run again


good luck

works :dancing:

[godfathertre]

can somebody explain this fault and the fix on these subaru p1571 thank you .

[drugowaz]

This solution cost big money. For free nobody will tell.

[godfathertre]

i do not want to offend eliaselias but surely something must go offline and needs to be synchronized again on the subaru immo .

[sleepyrz]

http://www.voisin.ch/subaru/docs_techniques/2008_impreza_wrx_&_sti_manuel_atelier/sti/sti_body/(diag)_immobilizer.pdf

p1571 is referenced here

sounds like a resync is needed of keys to ecu

https://www.iwsti.com/forums/ecu-tuning-and-performance-electronics/184810-help-please-ecu-compatibility-issue.html

interesting no?

[eliaselias]

can somebody explain this fault and the fix on these subaru p1571 thank you .

sometimes after key programming you will get this code even with the expensive tools ...

and for about the fix if you have a problem in future you can post here to get the fix

[Piter2004]

This is information what i did, how repair this problem. Please don't forget give me reputation. Thanks

[Piter2004]

This is information what i did, how repair this problem. Please don't forget give me reputation. Thanks

[Piter2004]

hello sorry for the late reply i did not notice that you make a post here
anyway this is your file in case you still need it


You wanted from me 200 euros for repairing this and don't send me password. There is how i repaired by myself for free for all users.

[drugowaz]

You reaied it yoursef by not knowing what your doing? Dont be funny ok. Somebody done it for you and youre know writing here as revenge to get reps?

[eliaselias]

You wanted from me 200 euros for repairing this and don't send me password. There is how i repaired by myself for free for all users.


DO NOT LIE... WHERE I ASKED YOU FOR 200 EURO ? DO NOT TALK TO JUST TALK ... YOU CAN ASK OTHER MEMBER
ANYWAY THIS IS NOT CORRECT SOLUTION BECAUSE THE HEX ARE TOTALLY DIFFERENT IN BOTH DUMP AND YOU HAVE CHANGED IMPORTANT DATA IN BCU AND ECU...
NEVER MESS WITH DATA THAT DON'T NEED CHANGE
MY SOLUTION CORRECT THE SAME BYTE DATA WITHOUT CHANGING ANOTHER SETTING IN ECU AND BCM..... FOR YOUR INFORMATION DATA IS CORRECTED ONLY IN 1 ECU AND NOT IN BOTH

ANYWAY GOOD LUCK

SORRY BUT YOU DON'T EVEN KNOW ANYTHING ABOUT SUBARU SYSTEM

[Piter2004]

All data is corrected because i was used for repairing SSM4 for subaru. That is set for subaru auto. When SS4 repaired i read all datas from memory Dashboard, Bcu, and ecu. If somebody has a problem with repairing i can help for free.

[rateb76]

Hello Eliaselias,
i have a problem with Impreza 2012 1.6 .. no sync as all people ..
IBU dump is attached .. i'll appreciate your help

[rateb76]

Eliaselias Solved the Problem ... you are the man ..
tried every thing Possible using SSM and many aftermarket Devices without Success ..

Many Thanks Eliaselias

:applause::applause::applause:

[eliaselias]

Eliaselias Solved the Problem ... you are the man ..
tried every thing Possible using SSM and many aftermarket Devices without Success ..

Many Thanks Eliaselias

:applause::applause::applause:

As i told before even expensive tool could not fix this problem
You are welcome my friend
And i am proud that you car started again

[narkeleptk]

Eliaselias Solved the Problem ... you are the man ..
tried every thing Possible using SSM and many aftermarket Devices without Success ..

Many Thanks Eliaselias

:applause::applause::applause:


Out of curiosity did you try method posted by piter20042?

[drugowaz]

That is wrong solution. Trust elias he knows

[narkeleptk]

I am not questioning the fact that elias knows what they are doing. They clearly do.

My question is for rateb76 and if they (or anyone else) tried the information provided by pifer2004 and if it was successful or failure. I dont need this work done I am just curious

[eliaselias]

I am not questioning the fact that elias knows what they are doing. They clearly do.

My question is for rateb76 and if they (or anyone else) tried the information provided by pifer2004 and if it was successful or failure. I dont need this work done I am just curious

You can ask rateb46.... For him all the provided solution not worked.
If you play randomly with dump you will get also cluster loosing synchro. So problem will get worst

[mikkhh]

I am not questioning the fact that elias knows what they are doing. They clearly do.

My question is for rateb76 and if they (or anyone else) tried the information provided by pifer2004 and if it was successful or failure. I dont need this work done I am just curious

in my case only one file was changed and different locations than the information here

[Piter2004]

586779This solution was repaired by ssm4. After repaired i read again and that is this files.

[mattyman007]

thank you for you help elias, here are the files

[eliaselias]

thank you for you help elias, here are the files

here is your magic file that will make your car back to life again

[mattyman007]

Thank you bro, you are the man!! Worked perfect

[husseintamimu]

HI ALL HERE i have subaru impreza with all lost key ma try to program key with skp900 but still not working now am ready immo data using tango to load that file but tango say unknown version ,,,can some one help me to check my file if there is a something wrong ...thanks
ecu part n.22765AF262,,112700-4302 ECU EEP 93C56B
IMMO PART N.88281FJ121 24L02

[hcip]

HI ALL HERE i have subaru impreza with all lost key ma try to program key with skp900 but still not working now am ready immo data using tango to load that file but tango say unknown version ,,,can some one help me to check my file if there is a something wrong ...thanks
ecu part n.22765AF262,,112700-4302 ECU EEP 93C56B
IMMO PART N.88281FJ121 24L02

Bad BCM dump............

[husseintamimu]

okay can you help to repair that data and check for also this cluster data..thanks

[hcip]

okay can you help to repair that data and check for also this cluster data..thanks

You need to program 2 keys to BCM before we can calculate CRC to Dash,

You can try this two paired dump, write Key in Key1 & Key2 using tango and post the BCM dump here save by Tango, I will try to married it in your dash

[husseintamimu]

You need to program 2 keys to BCM before we can calculate CRC to Dash,

You can try this two paired dump, write Key in Key1 & Key2 using tango and post the BCM dump here save by Tango, I will try to married it in your dash
i use lkp2 to programm ..

[hcip]

i use lkp2 to programm ..

Try it, I hope it wil work

[husseintamimu]

Try it, I hope it wil work

thnks let me try i will report ,......

[husseintamimu]

hi hcip am try to start a car but immo light stay on when i pun ignition on and it has two fault code ,,,,,,P1571 THIS IS CURRENT AND P1574 THIS IS HISTORY THERE IS ANYTHING I CAN DO HERE??

[hcip]

The file is not compatible to each other, The main problem is your original file from BIU was damaged and we cannot repair it

You need a good paired dumps from DASH,ECU & BIU and do allkeylost to start the car,

[eliaselias]

here is your magic file that will make your car start again with 100% testable solution
good luck:applause:

[husseintamimu]

here is your magic file that will make your car start again with 100% testable solution
good luck:applause:

THANKS HELP PASS PLS AND I CAN USE LKP-2 TRANSPONDER TO START THAT CAR??

[husseintamimu]

hello eliaselias help me password pls

[husseintamimu]

here is your magic file that will make your car start again with 100% testable solution
good luck:applause:

Thanks eliaselias for your magic file my car starting okay your genius bro great job .....

[eliaselias]

Thanks eliaselias for your magic file my car starting okay your genius bro great job .....


you are welcome my friend ... congratulation :dancing:

[hodza]

Hi Elias have 2013 Subaru XV and had locksmith try to code additional key but now cant even scan the dash no communication with scanner so bought a second hand dash and having fault codes B1578 and B1401 in ECM.Can you help wit this?

[eliaselias]

yes i can help you and car will run 100%
no need to buy second dash.... return it i will fix yours

[Zaebasto]

Hi! Need to repare 2008 Tribeca USA. In BCU 2 errors - B1401 B1402. 3 original keys avaliable, i see bad crc in BCU.

[Hanukkah]

Hi Elias,

Cluster corrupted and now not start with the new file. Can you help me with the BIU mod to start. Much appreciated.

TY

[eliaselias]

Hi Elias,

Cluster corrupted and now not start with the new file. Can you help me with the BIU mod to start. Much appreciated.

TY

hello what is the year and model of the car??
do you have cluster dump

[Hanukkah]

hello what is the year and model of the car??
do you have cluster dump

Hi Elias,

2014 Forester, have cluster dump from another because original was corrupted.

PS. might need to swap bytes for cluster dump.

TIA

[eliaselias]

Hi Elias,

2014 Forester, have cluster dump from another because original was corrupted.

PS. might need to swap bytes for cluster dump.

TIA

here is your file

[Hanukkah]

here is your file

Password please. Thanks

[jp71321]

subaru xv crossteck 2013 tried to program key wot turn on my bcm is 88281fj621 EEPROM 24C02

[eliaselias]

Add key job or all key lost?
Post dump to fix

[lazymechanic]

Hi guys, i am not sure if this is out off this topic but what tool is good to add key for Subaru after 2009, I try skp900 but it only has all key lost function, I am not sure that the only way to add key? Don’t want to mess up the car so better ask someone who knows :)

[eliaselias]

till 2010 it safe
be careful of impreza 2011+
GOOD LUCK"
if car get broken no need to worry ... just contact me

[Mininoob]

Hi Eliaselias

I have issue with Subaru XV 2014 Smart Key All lost. The car turn on but cannot progarm prox key as the immobolozier light keep flashing, could you please help.

BIU 24C02 Smart Unit 93c86

[Mininoob]

Up Up...Please help

[mikkhh]

https://www.digital-kaos.co.uk/forums/member.php/446218-eliaselias

[Mininoob]

Thank you for your help, I have pmed him, hopefully he will response soon. I am in deep trouble at the moment

[taxo1965]

Hello.Please help.Thanks

[silver1]

hello eliaselias , please can you help me immo subaru impresa year 2013 doesn't star.

here is bcm and ecu dump

thank you very much

[drugowaz]

Its not free service!

[silver1]

who is looking for free? if someone help me, i pay

[Rocky Sun]

Hello Gents please help sync for me
Subaru Outback 2005 Eeprom in ECU is L56R and BCM 24C01 Not smart key.

[Rocky Sun]

Hello Elias, plese help sync for me.
Outback 2005 blade key, ecu 24c01 bcm L56R

[ASCM]

outback ok

[hsierra]

hello post dump for bcm
i will solve your problem

HELLO: I HAVE SUBARU CROSSTREK XV 2013, THE INSTRUMENT CLUSTER WAS REPLACED AND NOW IT HAS THE THEFT ACTIVATED, AND I CANNOT SYNCROINIZE THE SYSTEM, TRY WITH SEVERAL PROGRAMMING DEVICES BUT WHEN THE 15 MINUTES OF WAITING IS OVER. TELL ME MESSAGE "SYNCRO FAILURE". PLEASE IF YOU CAN HELP ME, I THANK YOU. THANK YOU !

[hsierra]

HELLO: I HAVE SUBARU CROSSTREK XV 2013, THE INSTRUMENT CLUSTER WAS REPLACED AND NOW IT HAS THE THEFT ACTIVATED, AND I CANNOT SYNCROINIZE THE SYSTEM, TRY WITH SEVERAL PROGRAMMING DEVICES BUT WHEN THE 15 MINUTES OF WAITING IS OVER. TELL ME MESSAGE "SYNCRO FAILURE". PLEASE IF YOU CAN HELP ME, I THANK YOU. THANK YOU !

BCM DUMP ONLY?

[pimpin]

hi eliaselias l have problem subaru 2013 we replace cluster now no star l have file of BCM 24C02 can u help me please thanks in advance

[PierreTheron]

hi have this problem ..
Subaru forester 2016 all keys lost .
Lonsdor cannot make key .
Tried reading dash and deleted file (FFFFFFFFFFFF) now .
Tried reading Bcu and at least got a good read off it i think ..
How to proceed now as whole car was dead and is still dead now ...
( not keyless go on this but with g chip Key )

Attached my files and part numbers from this vehicle ...

[eliaselias]

hi eliaselias l have problem subaru 2013 we replace cluster now no star l have file of BCM 24C02 can u help me please thanks in advance

enjoy :)))))

[pakrat70]

Hello guys, I have a 2013 Subaru Impreza non smart key G chip with AKL. I tried a reset with Autopropad which failed. I did get two keys to program and the car cranks now but won't start. Any help would be appreciated.

[eliaselias]

No worries i send you already the file :) enjoy

[Fallen]

Module photo for @eliaselias

[Daymond Halsall]

Hello Eliaselias,

I have a 2012 Subaru G4 which is a JDM Impreza Sedan. Another locksmith worked on it before and now I have a P1571 Error after adding G Chips.

Clearly you know the solution so attached are 4 files.

I know the ECU and the BUI are the needed files but attached are the Cluster and a "Repaired ECU" file I used an X300Pro3 with its Synchro Repair Utility. and Eeprom Adaptor to fix. Cant get to the car till Wednesday so I thought I would send it for you to confirm if it would work or not.

Looking forward to you reply.

Br, Daymond

[Daymond Halsall]

Hello Eliaselias,

I have a 2012 Subaru G4 which is a JDM Impreza Sedan. Another locksmith worked on it before and now I have a P1571 Error after adding G Chips.

Clearly you know the solution so attached are 4 files.

I know the ECU and the BUI are the needed files but attached are the Cluster and a "Repaired ECU" file I used an X300Pro3 with its Synchro Repair Utility. and Eeprom Adaptor to fix. Cant get to the car till Wednesday so I thought I would send it for you to confirm if it would work or not.

Looking forward to you reply.

Br, Daymond
https://www.digital-kaos.co.uk/forums/images/styles/DarkCore/misc/paperclip.png Attached Files

https://www.digital-kaos.co.uk/forums/images/styles/DarkCore/attach/zip.gif KEY DATA.zip (https://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=832762&d=1630957915) (1.5 KB, 0 views)

[Protechtyler]

I have 2014 subaru forester, battery died while tech was programming spare g chip key. I have 24c02 file from biu, I pulled engine ecu but do not see eeprom. Do I need to remove cluster and provide bin file for cluster? Can you help me sir?

[Protechtyler]

also i know have virgin biu and cluster bin files for this 2014 forester i received from a friend if anyone is interested in helping with my issue.

[rockero]

Hola, ayuda SUBARU XV 2012 sin inicio, lee ECU y BCM
ECU: 22611-AU260 eeprom 93C86
BCM: 88281FJ200 eeprom 24C02
Gracias y avanzado.

[lion0304]

Hola, ayuda SUBARU XV 2012 sin inicio, lee ECU y BCM
ECU: 22611-AU260 eeprom 93C86
BCM: 88281FJ200 eeprom 24C02
Gracias y avanzado.

Here your ECU file repaired

Report back

[rockero]

Sorry the question, only repaired ecu file?
BCM is correct?
Thanks for your help.

[lion0304]

Sorry the question, only repaired ecu file?
BCM is correct?
Thanks for your help.

BCM file is OK, just write ECU file with sync code

[eliaselias]

........................................

[eliaselias]

Hello Eliaselias,

I have a 2012 Subaru G4 which is a JDM Impreza Sedan. Another locksmith worked on it before and now I have a P1571 Error after adding G Chips.

Clearly you know the solution so attached are 4 files.

I know the ECU and the BUI are the needed files but attached are the Cluster and a "Repaired ECU" file I used an X300Pro3 with its Synchro Repair Utility. and Eeprom Adaptor to fix. Cant get to the car till Wednesday so I thought I would send it for you to confirm if it would work or not.

Looking forward to you reply.

Br, Daymond

https://www.digital-kaos.co.uk/forums/images/styles/DarkCore/misc/paperclip.png Attached Files

https://www.digital-kaos.co.uk/forums/images/styles/DarkCore/attach/zip.gif KEY DATA.zip (https://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=832762&d=1630957915) (1.5 KB, 0 views)





solved :)
if any one need help leave me a text message...

[lion0304]

solved :)
if any one need help leave me a text message...

SOme waitting for you from a while

[eliaselias]

Hola, ayuda SUBARU XV 2012 sin inicio, lee ECU y BCM
ECU: 22611-AU260 eeprom 93C86
BCM: 88281FJ200 eeprom 24C02
Gracias y avanzado.

here is your file

[rockero]

Hello thanks for reply, pass?

[key mechanic]

ASCM (https://www.digital-kaos.co.uk/forums/member.php/599229-ASCM) . help me please. Subaru Forester 2012 sync 871191

[subiexv]

hello can someone help me with my subaru xv 2013 .. eeprom damage ( 93c76AD ).. tried to lower the mileage. then its not sync with my BCM.. need my mileage 105000

[innochambs]

hi

i have same problem but only have bcm with part number 88281FJ100 as the vehicle is far way only got sent the bcm but can ask for ecu if needed

[fred77]

God what tools you lot using to f'up these cars????

[gaspaar13]

Hello, i have a friends subaru all key lost, try already to do the keys but have this dtc B1401 Combination meter Collation and B1402 Immobilizer key collation, can be solved?

[andresfn18]

please sync this files
biu 24c01
dash 93c76

[key4it]

Messaged directly :)

[Highbuyard]

I have same problem please help me. My car subaru xv 2013 . I will cahnge my BIU becouse internal damage in circuit shift lock solenoid p0801. I have buy used BIU 88281fj520 how to clone originL BIU to used BIU . Please hwlp me ?

[eliaselias]

I have same problem please help me. My car subaru xv 2013 . I will cahnge my BIU becouse internal damage in circuit shift lock solenoid p0801. I have buy used BIU 88281fj520 how to clone originL BIU to used BIU . Please hwlp me ?


you can swap eeprom 24c02 ...its market as IC17 in board

[Highbuyard]

Thanks you sir. It helpful many thanks

[impolis]

Please sync subaru outback 2011 dumps

[krlo1493]

just write this new file and your car will be started with all key

Hello Elías, could you help me with the 88281fj200 module? I want to clone it but I can't find the eeprom memory, could you tell me the location on the board?
The vehicle had a crash and does not start, and they bought another module but it does not have the key information.

[Daoudinho]

Hi friends, please can you help me made immo off ecu subaru 22611am02a

[ianfluxe]

hi guys, i need help please, i need to sync these 3 modules ecu biu and cluster it's from a 08 impreza jdm denso ecu 22611AM760 *237330I*

[MartiLer]

BCM and instrument panel dumps are not read correctly.

[ianfluxe]

sorry for that bro, can you check this dump file thank you

[Devard242]

hi guys i have a 2012 subaru impreza transponder key locksmith tried to make all keys lost and failed i was able to make two transponder chips with vvdi2 immo tool but now i get P1571 reference code can someone help sync ecu and bcm ,

bcm has 24c02 eeprom and ecu has 93c56 eeprom i also have file of ecu read with pcm flash.

willing to pay need this done.

[lukasz12345]

Hello

Hello, this post is old but maybe someone knows how to help me


Subaru Forester 3 damaged dash found on the forum EPROM now the counter starts but the car won't start.
I need synchro

[JO AUTO TECH]

hi also i have same problem in subaru impreza ..but my car other programmer try to make immo off so write wrong file in immo ecu and ecu.

[lupu_sandu]

Anyone can help sync ecu dump with BIU dump?
Car is a Subaru Forester and engine was swapped from a LEGACY.
24c01 BIU dump, 93c66 from original Hitachi ecu, and 93c86 from Denso actual ecu attached.
I played with some sync dumps but still have P1571 error in ecu.
Thanks in advance.

[mjoesen]

Hello Elias!

I need a syncro between BCM and ECU (I think). Do you still provide this service?

[mjoesen]

here is your file

Hello Elias!

I need a syncro between BCM and ECU (I think). Do you still provide this service?

[MartiLer]

Where are your dumps?

[mjoesen]

Sorry!

This is my dumps:

BCM 88281FJ469 24C02
ECU 22765AH980 93C56 (read it in 8-bit)

Subaru XV 2015

Thank you very much!

[Pure8100d]

here is your file that will make your car start

Hey eliaselias Ive tried to PM you but I can't maybe because I'm new member not sure I have start problem with my Subaru Forester 2010 after cluster swap by any chance I could pay you help with the immo issue between the IPC and biu many thanks

[mjoesen]

I have tried to sync the BCM/ECU/Dash with very good assistance from MartiLer, but it did not work, and I think the fault is somewhere else. I have a "P1572 IMM circuit failure" after attempting to program a spare key to a 2015 Subaru XV, and now the OEM key doesn't work anymore. No limmo light on, but after trying to start (car is cranking) the immo light light up.


I bought a used ECU, but it did not help. Does anyone know if it will work if I buy the BCM/BUI and dash with a key from the same car at a scrapyard? Or do I need anything more, like programming?
It's hard to find good information about this Subaru model.

Many thanks for any suggestion.

[key mechanic]

hello post dump for bcm
i will solve your problem
Subaru XV 2016 hi, can you help me if the dump doesn't accept Tango 24c02? The key is also not programmable according to the db. They 've already tried to get me started . thank you in advance. Link to the dumps

[borshch]

is far is i know bcm(BIU) gets synchronized with cluster. looks like dump was damaged. find another used bcm add key via dump and sync with cluster via dump, I'm sure somebody can help with that here.
or find dump out of the same bcm part number do key and sync.
i have one dump out of 13 XV may be it will work for you. post your part number.

when you send car to subaru dealer they remove bcm and cluster and send it somewhere to reset to a brand new state.

anyone where they send it ? And how come dealer can’t do it ?