Polo johnson control NEC+95320

[Edc17tricor3]

Hi to all,
I need help to change mileage on this 95320 equipped on vw Polo.

I need 60 000km

Someone can help me?

[zckariya70]

By obd...............

[Edc17tricor3]

By obd...............

Vvdi2 cannot support this dasboard (officially supported but not this specific version)

[vasa]

smelecom can do this job tested FVDI can read immo data but not trying change km Digiprog3 cant do error on dashboard cluster damage

[gogoli]

Jonson dash cant do by obd avdi,enigma,vvdi etc....for moment not have see tool for do it...........

[vasa]

Jonson dash cant do by obd avdi,enigma,vvdi etc....for moment not have see tool for do it...........

this isnt mqb platform this is old jc nec +95320 avdi cant do 6R920861M 2009-2013

[alperstyl]

diagprog4 does work

[Edc17tricor3]

this isnt mqb platform this is old jc nec +95320 avdi cant do 6R920861M 2009-2013

I tried with
vvdi2=not supported message
avdi official=read dump e2p by obd - error extract immo data - when i writed km dashboard is dead (recovered because i previous done a backup of 95320)
digiprog3 clone=same as avdi, kill dash

Manual correction is possible?

[steveleo]

I tried with
vvdi2=not supported message
avdi official=read dump e2p by obd - error extract immo data - when i writed km dashboard is dead (recovered because i previous done a backup of 95320)
digiprog3 clone=same as avdi, kill dash

Manual correction is possible?

No manual correction possible as mileage in mcu, too. Seems to be a SW406. Why vvdi or avdi do not support them... no idea. They should do some homework. avdi kills pretty sure because mileage location changed compared to older versions of this dashboard.

[Nicolas9]

X-tool does work..i did many times.

One time I did with digiprog, then got error message. Then I solved it with fvdi.(but sometimes digiprog does work, need to remove battery for half n hour.. but this trick don't always work)

[sagie1zn]

I tried with
vvdi2=not supported message
avdi official=read dump e2p by obd - error extract immo data - when i writed km dashboard is dead (recovered because i previous done a backup of 95320)
digiprog3 clone=same as avdi, kill dash

Manual correction is possible?

dash die while doing obd and you write file direct on chip and it come alive?? reason i ask is it happened to me last year and had to buy used clock and adapt. So if i had saved file direct, i could recover??

[vasa]

[QUOTE=sagie1zn;3197525]dash die while doing obd and you write file direct on chip and it come alive?? reason i ask is it happened to me last year and had to buy used clock and adapt. So if i had saved file direct, i could recover??[/QUOTE ]

hi mate he have got eeprom 96320 backup befor obd2 adapt .... wrrite back and dashboard work . No problem on Nec procesor
smelecom work 100% without error

[Ocin]

smok work fine for this dash.

i need a pics from board can you take me a pics from your dash ?

[rtbdiagnostic]

https://youtu.be/wD3dzhuS-bc

interesting with enigmatool using cable C47 which is vw magneti marelli (MM) cluster Nec +95320 - video is option for JCI cluster

[antons35080]

elprosys DP4 WORKT .....: applaus:

[marek128]

how to repair 95320? my dash is dead only diag ok