Alfa 147 edc16c39 [Sitemap]

dtip

25th January, 2018, 05:16 PM

I need help with this alfa edc16c39 1.9 jtdm . Egr off is already done and i think it is ok with this switch off ,but someone removed SWRIL flaps from car and car is in limp mode now with 2 dtc's (flow shutter valve) regarding it, i can remove DTC's myself but it wont help limp mode. Can someone do proper SWIRL FLAPS off or limp mode off please?

ECU:
HW: 0281012883
SW: 1037379006

dtc and limp mode: p2013 and p2008

tnx in advance

dtip

25th January, 2018, 09:38 PM

Can anyone point me is there swirl flaps switch off adress at all for this map since actuator plug is removed?

sdtsedat

25th January, 2018, 09:42 PM

How did you read it?

sdtsedat

25th January, 2018, 09:54 PM

You need to read it with BDM. Over OBD is no possible for remove dpf, egr or swirl flaps.

dtip

25th January, 2018, 10:00 PM

are you sure about that? it is fiat edc16c39 not opel. I already did switch off egr which i found switch adress on other forum....

voltechcar

25th January, 2018, 10:23 PM

so...... dpf egr & vsa off to obd in this car, but egr off its not perfect work in your solution, when you disconnect connector car have emergency mode, in Fiat edc16 you must cut safe mode. Vsa only dtc not work because this software have feed back, you cut dtc but he still check voltage in engine swirl.

Disconnect connector with swirl in my solution.

dtip

25th January, 2018, 10:31 PM

so...... dpf egr & vsa off to obd in this car, but egr off its not perfect work in your solution, when you disconnect connector car have emergency mode, in Fiat edc16 you must cut safe mode. Vsa only dtc not work because this software have feed back, you cut dtc but he still check voltage in engine swirl.

Disconnect connector with swirl in my solution.

thank you so much rep added.

I will test tomorrow, so what do you think car is maybe in emergency mode mode becouse of bad EGR solution ?

voltechcar

25th January, 2018, 10:34 PM

when you disconnect connector with egr he have emergency mode

dtip

25th January, 2018, 10:41 PM

when you disconnect connector with egr he have emergency mode

Damn, yes egr was disconnected :( , anyway i will try this file with Swirl flaps off and i will connect EGR tomorrow. thank you for your help

dtip

26th January, 2018, 02:26 PM

Just to report file works great. Also car runs great with and without disconnected EGR, i connected it just in case. Mostly important your swirl flaps off solution is great! thank you again

voltechcar

26th January, 2018, 08:54 PM

:victorious::victorious::victorious: yeah I know.....:)