Ford focus 2003 all key lost (EU)

[ciprishor]

Hello guys, can you help me adding a key to this car? PCM is EEC-V, I've read the 95040 eeprom.

I've tried using Effi with Zedbull to program a transponder but it is not working.

Is it possible to manually add the key to the dump?

I have 3 different 4d60 chips which because or different attempts with Zedbull are not in the initial state anymore (for 2 of them LCK for page 2 was set).

I know that it is easy to add key by OBD but do not have the proper tool.

[ciprishor]

I have identified 2 areas in the dump which seems to be the keys. Anyone can confirm? Cannot go to car before tomorrow.

[ciprishor]

My assumption is wrong, that is not the area where the keys are.

[dtip]

do you have simple china elm cable ?

[droidwayne65]

Never mind.

[ciprishor]

I have simple elm cable. What's the idea?

[richard27]

I have simple elm cable. What's the idea?
hello maybe help

[dtip]

I have simple elm cable. What's the idea?

idea is to download forscan software , register on forum and get "extedned licence" (all free) and program pats keys over obd in 5 minutes.

[autoden]

Good idea BUT even with Forscan and extended license you have to have at least 1 working key.....AND account for in/out code

[ciprishor]

Isn't Forscan allowing timed coding (wait 10 min without any in-out code)?

[dtip]

Good idea BUT even with Forscan and extended license you have to have at least 1 working key.....AND account for in/out code

you don't need working key , you can program keys like any other key programmer for ford when all keys lost - delete all keys and then program two keys , also there is implemented in code out code calculator in latest version and yes there is time coding but not needed.