PDA

View Full Version : RNS 510 - 1T0 035 680B HW04 SW1100 - Corrupted eeprom


locarno
28th January, 2018, 01:52 PM
Hello
I need eeprom dump for VW RNS 510 - 1T0 035 680B HW04 SW1100
My dump is corrupted, and navi won't enable.
bogege
28th January, 2018, 02:09 PM
Hello
I need eeprom dump for VW RNS 510 - 1T0 035 680B HW04 SW1100
My dump is corrupted, and navi won't enable.

Here have dump from eeprom, maybe help you................http://www.digital-kaos.co.uk/forums/showthread.php/198741-continental-navi-1T0-035-680B?highlight=RNS+510+-+1T0+035+680B
locarno
28th January, 2018, 02:47 PM
I already tried this, but radio won't start.

Here's my current eeprom. I think it is corrupted because it have some FF's inside compared to another dump, and:
-Touchscreen don't work
-Radio start without code
-Radio have high power consumption (about 3A)

Radio won't start on any other eeprom from forum.

Can somebody tell me what is stored in offset 00000016 ?

https://obrazki.elektroda.pl/8521235000_1517147605_thumb.jpg (https://obrazki.elektroda.pl/8521235000_1517147605.jpg)

If I change this offset in my current eeprom, then radio won't start.
If I write this offset to another eeprom, then radio start.
locarno
28th January, 2018, 07:51 PM
Ok. Solved I just write ST10 + Flash + Eeprom from similar unit.

It is important because ST10 + Flash are connected with eeprom in this case. This is strange.
audiopoint
29th June, 2018, 09:02 PM
anyone have download link for SW1100
IchBins
30th June, 2018, 07:53 AM
anyone have download link for SW1100


https://dfiles.eu/files/axs4zm6hi
matociso
19th January, 2019, 09:21 PM
Ok. Solved I just write ST10 + Flash + Eeprom from similar unit.

It is important because ST10 + Flash are connected with eeprom in this case. This is strange.

hello, how do you read st10? what programmer?
razvanrms
19th January, 2019, 09:50 PM
vvdi prog programer
leon.79
8th April, 2019, 04:06 PM
Ok. Solved I just write ST10 + Flash + Eeprom from similar unit.

It is important because ST10 + Flash are connected with eeprom in this case. This is strange.



Do you have this software packfor all 3 memories for me please, i also have 1T0 035 680B HW04

thanks
locarno
13th April, 2019, 06:17 PM
Do you have this software packfor all 3 memories for me please, i also have 1T0 035 680B HW04

thanks

Write PM to me.
daltonagf
19th July, 2019, 01:39 PM
Write PM to me.


i also need the eepromdumps for the rns 510, where can i find it, (pm send did not work for me)
daltonagf
19th July, 2019, 02:07 PM
>>>>>>>>>>>>>>>NO EMAIL ADDIES<<<<<<<<<<<thanks
cooper90
15th August, 2019, 11:28 PM
Hi

I have the same problem with my rns510, can you tell me how to Write the st10 +flash+eeprom? I have a TL86ii, can I do it with this programmer?
kiermagik
22nd February, 2020, 01:30 AM
Anyone know a programmer for st10 chip?
locarno
22nd February, 2020, 04:42 PM
I'm using Martech for ST10 programming.
mantasel
25th August, 2023, 11:27 PM
Write PM to me.
Could You send software packfor all 3 memories for me, thanks!
cacko85
26th April, 2024, 11:54 PM
Ok. Solved I just write ST10 + Flash + Eeprom from similar unit.

It is important because ST10 + Flash are connected with eeprom in this case. This is strange.

Hello
Can I have all working dump/bin files.
Thanks.