Chiptune a Renault Traffic 2.0

[blackbini]

Hi, I would like to chip the Renault Traffic of my colleage.
but I read in the kess help file, I need to program the injectors. Is this just that in Kess under tools or do I need anything else? I also got Delphi, perhaps this could do it?
Thank you for help!

[AGDiag]

Hi,
You should be able to write the injector codes with Delphi if after the tuning the memory of the injector codes is wiped out. What year is the car?

[unnamed11112007]

100% solution for EDC16 this read/write BDM :chuncky:

[pulsar2000]

you need to read inj nozzle and write back with diagnostic tool,
you should have read under tools section off kess, then wrote back after flash,
BR

[blackbini]

Hi,
You should be able to write the injector codes with Delphi if after the tuning the memory of the injector codes is wiped out. What year is the car?
The car is from a 2014 but its a Traffic 2 not 3

Do I need to read it first with Delphi, or can I there just klick like " Code injectors" ?

@
pulsar2000

Ok if this is enough I will try.

[Inquizit0r]

Read/Write Injectors in KESS menu TOOL. In the beginning read coding, read flash, write flash, write injectors code. KESS do it all.

[blackbini]

Btw. Just if anyone in the future reads this, yes it worked with Kess reading and writing the injectors.