obeids
30th January, 2018, 09:18 PM
Hi there
SO basically the client lost his key.
I went to program a new key and decided to try out my new LONSDOR machine on this car. I turned on ignition by picking ignition. The cluster remained off despite Car radio and Fan coming on. I connected the Lonsdor and tried to read and it failed to retrieve Immo Data but read part number. I then hooked up my faithful VVDI2 and pressed read eerpom. It did security bypass and read, and suddenly cluster came on but now it shows DEF on the display and no mileage. I tried reading immo data but it keeps saying failed. It read eerpom over OBD but no immo data.
I then read ECU which happens to be MED17 and it read and calculated the PIN, MAC and CS.
I have that data.
So how to fix up this DASH and get the car running again? The correct mileage should be around 187400km.
I have attached the Cluster eeprom and also ECU eeprom read by VVDI2.
SO basically the client lost his key.
I went to program a new key and decided to try out my new LONSDOR machine on this car. I turned on ignition by picking ignition. The cluster remained off despite Car radio and Fan coming on. I connected the Lonsdor and tried to read and it failed to retrieve Immo Data but read part number. I then hooked up my faithful VVDI2 and pressed read eerpom. It did security bypass and read, and suddenly cluster came on but now it shows DEF on the display and no mileage. I tried reading immo data but it keeps saying failed. It read eerpom over OBD but no immo data.
I then read ECU which happens to be MED17 and it read and calculated the PIN, MAC and CS.
I have that data.
So how to fix up this DASH and get the car running again? The correct mileage should be around 187400km.
I have attached the Cluster eeprom and also ECU eeprom read by VVDI2.